topic Problem to connect directly to CISCO AP 1850 in Wireless

Problem to connect directly to CISCO AP 1850

BenjaminLucas — Mon, 05 Jul 2021 19:58:05 GMT

I would like to know how to connect directly from my PC to Access point and set to static IP? My plan is to configured this access point as stand alone devices. Currently radio AP is disable so I cant connect directly through CiscoAirProvision SSID wireless.

Re: Problem to connect directly to CISCO AP 1850

Sandeep Choudhary — Mon, 04 Jan 2021 08:23:32 GMT

Best way is to connect via console and change the Mgmt IP address of the AP.

by using the command:

config interface address management <ip-addr> <ip-netmask> <gateway>

Regards

Dont forget to rate helpful posts