WLC 9800 | Unable to locate packages.conf | Rommon

noor_amri — Mon, 05 Jul 2021 20:12:57 GMT

Hi all,

the problem occur after reboot. I think the file missing, now i stuck at "rommon". your advice very2 appreciated.

output from console:

Initializing Hardware ...

Current image running: Boot ROM0
Last reset cause: LocalSoft

The values of MSR 0x198h = 00001400 and MSR 0x199h = 00001400 for KATAR
C9800-L-X-K9 platform with 16777216 Kbytes of main memory

Warning: filesystem is not clean
Directory packages.conf not found
Unable to locate packages.conf directory
Unable to load packages.conf
boot: error executing "boot bootflash:packages.conf"
autoboot: boot failed, restarting...

Initializing Hardware ...

Current image running: Boot ROM0
Last reset cause: LocalSoft

The values of MSR 0x198h = 00001400 and MSR 0x199h = 00001400 for KATAR
C9800-L-X-K9 platform with 16777216 Kbytes of main memory

boot: unsupported boot device "bootflashh"

autoboot: boot failed, restarting...

Initializing Hardware ...

Current image running: Boot ROM0
Last reset cause: LocalSoft

The values of MSR 0x198h = 00001400 and MSR 0x199h = 00001400 for KATAR
C9800-L-X-K9 platform with 16777216 Kbytes of main memory

no valid BOOT image found
Final autoboot attempt from default boot device...
Warning: filesystem is not clean
Warning: filesystem is not clean
File size is 0x00020d3a
Located memleak.tcl
Image size 134458 inode num 11, bks cnt 33 blk size 8*512
##
Boot image size = 134458 (0x20d3a) bytes

Unsigned package found, aborting package loading...

Failed to Free memory block at address 0x000000008592f000
Warning: filesystem is not clean
File size is 0x0000001e
Located throughput_monitor_params
Image size 30 inode num 12, bks cnt 1 blk size 8*512

Boot image size = 30 (0x1e) bytes

Unsigned package found, aborting package loading...

Failed to Free memory block at address 0x00000000858f7000
Warning: filesystem is not clean
File size is 0x00000358
Located vlan.dat
Image size 856 inode num 13, bks cnt 1 blk size 8*512

Boot image size = 856 (0x358) bytes

Unsigned package found, aborting package loading...

Failed to Free memory block at address 0x00000000858bf000
boot: cannot determine first file name on device "bootflash:/"
autoboot: boot failed, restarting...

Initializing Hardware ...

Current image running: Boot ROM0
Last reset cause: LocalSoft

The values of MSR 0x198h = 00001400 and MSR 0x199h = 00001400 for KATAR
C9800-L-X-K9 platform with 16777216 Kbytes of main memory

rommon 1 >
rommon 1 >
rommon 1 >
rommon 1 >
rommon 1 >

Thank you,

Regards

Nooramri

Re: WLC 9800 | Unable to locate packages.conf | Rommon

Leo Laohoo — Wed, 10 Feb 2021 03:19:28 GMT

Post the complete output to the following commands:

set
dir bootflash:

Re: WLC 9800 | Unable to locate packages.conf | Rommon

noor_amri — Wed, 10 Feb 2021 03:28:14 GMT

here the result :

rommon 7 > dir bootflash:
Warning: filesystem is not clean
File System: EXT2/EXT3

564145 4096 drwxr-xr-x .dbpersist
1569793 4096 drwxr-xr-x .USWAP
907537 4096 drwxr-xr-x .CRFT
11 134458 -rw-r--r-- memleak.tcl
1340865 4096 drwxr-xr-x .inv
12 30 -rw-r--r-- throughput_monitor_params
13 856 -rw-r--r-- vlan.dat
416977 4096 drwxr-xr-x onep
237105 4096 drwxr-xr-x license_evlog
1275457 4096 drwxrwxrwx .installer
490561 4096 drwxr-xr-x webui_helper
989297 159744 drwxrwxrwx tracelogs
rommon 8 > set
PS1=rommon ! >
SWITCH_NUMBER=1
THRPUT=
MCP_STARTUP_TRACEFLAGS=00000000:00000000
LICENSE_ACTIVE_LEVEL=adventerprise,all:c9800lk9;
CONFIG_FILE=
BOOTLDR=
CHASSIS_HA_LOCAL_MASK=255.255.255.0
LICENSE_BOOT_LEVEL=
CRASHINFO=bootflash:WLAN-1001_crashinfo_RP_00_00_20210122-100844-UTC
CHASSIS_HA_LOCAL_IP=169.254.0.1
CHASSIS_HA_REMOTE_IP=169.254.0.2
SWITCH_PRIORITY=1
RET_2_RTS=
BOOT=bootflash:packages.conf,12;bootflashh:packages.conf,12;
RET_2_RCALTS=
BSI=0
RANDOM_NUM=687943637
?=0
rommon 9 >

Re: WLC 9800 | Unable to locate packages.conf | Rommon

Leo Laohoo — Wed, 10 Feb 2021 04:03:17 GMT

Emergency Recovery

topic Re: WLC 9800 | Unable to locate packages.conf | Rommon in Wireless

WLC 9800 | Unable to locate packages.conf | Rommon

Re: WLC 9800 | Unable to locate packages.conf | Rommon

Re: WLC 9800 | Unable to locate packages.conf | Rommon

Re: WLC 9800 | Unable to locate packages.conf | Rommon