topic Re: Wireless Security in Wireless

Wireless Security

roopunix123 — Sun, 04 Jul 2021 18:08:23 GMT

Hello all!!

I own a wireless lan on my hotel. Every thing is fine.I am sharing internet.I have done this by natting On linux.And then one cable goes to the access point. [Access point is not doing the nat linux is doing it..] I am assignning ip via DHCP that is 192.168.1.0./24 . Now the problem is that the guest's are peering to other guests computer.They some times delete other guests file also. So what do i do now.I just want them to use the internet only. Not peer on the other guests computer..Is there any any possibility i can do. .If cisco Access Point Can resolve this issue then there is no problem for me to replace it with the cisco ones, But it should be tri mode[A/B/G] Simultineously..

Thanking You...

Re: Wireless Security

sethgarnar — Thu, 22 Sep 2005 18:58:16 GMT

You will want to add some firewall rules on your linux router to drop all traffic except for http. How to do this depends on your vers of linux. I suggest you check out some linux distros geared at being a router only. I used to use one called Clark Connect. It had a nice web based front end for management.

Re: Wireless Security

dopenfield — Thu, 06 Oct 2005 14:56:15 GMT

Look at PSPF

Publicly Secure Packet Forwarding (PSPF) prevents client devices associated to a bridge or access point from inadvertently sharing files with other client devices on the wireless network.

http://www.ciscotaccc.com/wireless/showcase?case=K16772337

Re: Wireless Security

nikki_carol — Sat, 24 Nov 2018 05:23:35 GMT

Cisco Unified Wireless Network Architecture—Base Security Features. The Cisco Unified Wireless Network solution builds upon the base security features of 802.11 by augmenting RF, 802.11, and network-based security features where necessary to improve overall security.