topic Re: Login via GUI is refused in Wireless

Login via GUI is refused

suleman.rahman05 — Mon, 05 Jul 2021 20:19:24 GMT

Why was the default Cisco access point password through the GUI being rejected?

Autonomous AP 2700 series

Re: Login via GUI is refused

balaji.bandi — Wed, 03 Mar 2021 18:54:54 GMT

have you reset and configuring first time ?

Step 3 Enter your username in the User Name field. The default username is Cisco.

Step 4 Enter the wireless device password in the Password field and press Enter. The default password is Cisco. The Summary Status page appears.

General document :

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap4-first.html

Re: Login via GUI is refused

suleman.rahman05 — Wed, 03 Mar 2021 19:05:17 GMT

I am resetting the access points by entering new software via tftp but after running the GUI the password I entered is continuously rejected

Re: Login via GUI is refused

balaji.bandi — Wed, 03 Mar 2021 19:09:02 GMT

what version of code you were installing ? what browsers , Try IE ?

Re: Login via GUI is refused

suleman.rahman05 — Wed, 03 Mar 2021 19:14:44 GMT

I use ap3g2-k9w7-tar.153-3.JPK, then i run chrome browser

Re: Login via GUI is refused

balaji.bandi — Wed, 03 Mar 2021 19:36:37 GMT

Try IE or FF and let us know any success.

Re: Login via GUI is refused

suleman.rahman05 — Wed, 03 Mar 2021 19:44:57 GMT

not successful

Re: Login via GUI is refused

suleman.rahman05 — Thu, 04 Mar 2021 01:42:43 GMT

if done via CLI the Cisco password works fine, but using a web browser (GUI) does not work properly

Re: Login via GUI is refused

balaji.bandi — Thu, 04 Mar 2021 08:24:57 GMT

I have not heard any bugs, if you have any Latest firmware available or that Model try loading and test it.

Re: Login via GUI is refused

Rich R — Thu, 04 Mar 2021 19:21:21 GMT

do not waste your time trying to use the GUI - just stick with CLI

https://community.cisco.com/t5/wireless/cisco-3702i-web-gui-won-t-update-settings-properly/td-p/4299687

Re: Login via GUI is refused

jeffbeaulieu — Tue, 20 Dec 2022 03:50:43 GMT

I am facing the exact same problem with a Cisco Air-Cao3502E-a-k9 in Autonomous mode (ap3g1-k9w7-tar.default). It initially worked and then out of nowhwere it simply keeps asking for my credentials without actually allowing me to get through. Yet if I enter wrong credentials I get a 401 error. Also just like you login using CLI / Telnet works no problem.

Have you been able to figure out what was the issue?