topic Re: Why the error message happen when changing Layer 2 security at WLC. in Wireless

Why the error message happen when changing Layer 2 security at WLC.

wfqk — Mon, 05 Jul 2021 20:20:54 GMT

Hi, In the WLC, whenever changing Layer 2 Security to None, the below window box jump up. I already removed Radius under the tab "AAA Servers" Why that happen again? Thank you

Re: Why the error message happen when changing Layer 2 security at WLC.

Rasika Nayanajith — Tue, 09 Mar 2021 05:40:31 GMT

Look under the Advanced tab & you will see "NAC State" check box. Make sure you select "none" there and that error msg should go away.

By the way when you select Layer2 Security "None" mean it is open auth SSID

HTH

Rasika

*** Pls rate all useful responses ***

Re: Why the error message happen when changing Layer 2 security at WLC.

MHM Cisco World — Tue, 09 Mar 2021 17:49:10 GMT

L2 L3 and advance page,
please share here all these three page to understand what happened.

Re: Why the error message happen when changing Layer 2 security at WLC.

wfqk — Wed, 10 Mar 2021 02:32:46 GMT

Thank you Rasika, you are correct. Setting "None" is just for testing.