topic Re: AP9100 cannot join WLC in Wireless

AP9100 cannot join WLC

eigrpy — Mon, 05 Jul 2021 20:23:26 GMT

The AP9100 cannot join WLC3504. The AP shows some time and day wrong. I could not find the time configuration of document since it is pretty new model. Please see attached debug file and below diagram. Anyone has some suggestions and share some documents link? Thank you

Re: AP9100 cannot join WLC

Leo Laohoo — Mon, 15 Mar 2021 21:53:27 GMT

Post the complete output to the following commands:

WLC: sh sysinfo
WLC: sh time
AP: sh version
AP: sh ip interface brief
AP: sh capwap client rcb

Re: AP9100 cannot join WLC

Scott Fella — Mon, 15 Mar 2021 22:52:31 GMT

Looks like you need to upgrade the image on the controller.

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Your time looks off also. Take a look at what Leo posted.

Re: AP9100 cannot join WLC

MartinSerupBlakSorensen67875 — Tue, 16 Mar 2021 07:47:43 GMT

Hi,

As mentioned you can see from the output:

"[*08/06/2020 00:17:04.3324] Discovery response from MWAR 'ABC' running version 8.5.140.0 is rejected."

That the Code on the WLC does not support the AP, check the cisco wireless compatibility matrix: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

9105's are supported from 8.10.130.0 code

9130's and 9120E's are supported from 8.10.105.0 code

9115,'s and 9117's are supported from 8.9.100.0 code

9120i's are supported from 8.9.111.0 code

Kind regards, Martin.

Re: AP9100 cannot join WLC

eigrpy — Tue, 16 Mar 2021 15:33:47 GMT

Thank you MartinSerupBlakSorensen67875 for your analysis!