topic Re: Adding access points in Wireless

Adding access points

Tarun1 — Mon, 05 Jul 2021 20:23:31 GMT

Hi All,

Sorry in advance if this comes across as a dumb question.

Background - Currently have a 2702 model AP connected to a 2960 switch in a large warehouse setting.

We want to add two more WAPs in the area. Due to the location it is not easy to run extra cabling back to the switch so I was wondering if a small 4 port PoE switch plugged into the single data point at the location will do the trick i.e. run three WAPs.

In effect the three WAPs will be running off a single port on the 2960 switch.

Cheers.

Re: Adding access points

Leo Laohoo — Tue, 16 Mar 2021 06:52:14 GMT

Data Sheet: Cisco Catalyst Micro Switches

The CMICR-4PT would be ideal for your deployment.
NOTE: There is a dual-personality SFP/Copper in the back of this unit (not included in the picture).

Re: Adding access points

Tarun1 — Wed, 17 Mar 2021 01:27:59 GMT

Thank you @Leo Laohoo

What about something simple like this - https://www.tendacn.com/au/product/teg1105p-4-63w.html