topic Re: How to verify AP LAN interface speed in Cisco 9800 WLC? in Wireless

How to verify AP LAN interface speed in Cisco 9800 WLC?

brobinb — Mon, 05 Jul 2021 20:25:31 GMT

Wondering what's the CLI to verify AP LAN interface speed on Cisco 9800 controllers...

On the AireOS controllers, you can do 'show ap stats ethernet summary'... And this command is not available on 9800 WLC.

Re: How to verify AP LAN interface speed in Cisco 9800 WLC?

balaji.bandi — Sun, 21 Mar 2021 21:44:50 GMT

show ap name config ethernet

To see Ethernet related configuration information of an AP, use the show ap name ap-name config ethernet command.

show ap name ap-name config ethernet [ chassis {chassis-number | active | standby} R0]

check command syntax :

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/cmd-ref/b_wl_16_10_cr/show-commands.html#wp2666625550

Re: How to verify AP LAN interface speed in Cisco 9800 WLC?

brobinb — Mon, 22 Mar 2021 22:05:18 GMT

Thanks for the reply.

The commend you refer doesn't return any output, maybe it's for AP with specific ehternet config?

Actually, found the 'show ap name [ap-name] ethernet statistics' can show the ethernet speed. However, this commend only shows 1 AP at a time. If there are hundreds of AP, then not easy to run.

Re: How to verify AP LAN interface speed in Cisco 9800 WLC?

balaji.bandi — Tue, 23 Mar 2021 08:18:46 GMT

then use 2 methods. for both out of the box scripts or SNMP

I am sure they connected to Switch.

1. you can run SNMP walk using snmpwalk or NMS tools. or script get connected port speed using any scripting methods out of the box. if you looking to generate the report.

Re: How to verify AP LAN interface speed in Cisco 9800 WLC?

netops500 — Thu, 25 Jan 2024 17:06:44 GMT

Run the command show AP ethernet statistics, it'll show you there.