topic 1400 Bridges Security in Wireless

1400 Bridges Security

rmarins — Sun, 04 Jul 2021 16:05:31 GMT

Is ther a way to improve strong security between two wireless bridges 1400 without use of a RADIUS server?

Thanks,

Ronaldo.

Re: 1400 Bridges Security

pradeepde — Tue, 21 Oct 2003 18:11:09 GMT

You can try Tacacs+ or WEP as secuirty, for more details check out the following URL,

http://www.cisco.com/univercd/cc/td/doc/product/wireless/aero1400/br1410/brscg/index.htm

Re: 1400 Bridges Security

rmarins — Wed, 22 Oct 2003 22:20:00 GMT

Ok, but using Radius or Tacacs+ i can use EAP and dynamic WEP. It is possible to use EAP and/or dynamic WEP without Radius or Tacacs+, with local account for example? Can you show an example configuration?

Re: 1400 Bridges Security

rmarins — Fri, 24 Oct 2003 10:08:51 GMT

The following URL show a local radius server configuration, but only supported on access points:

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_command_reference_chapter09186a0080184a84.html#2488738

Is there a solution for bridges??

Re: 1400 Bridges Security

jtorkos — Mon, 08 Dec 2003 17:57:11 GMT

I'm also looking for the same answer. Did Cisco ever get back to you with an answer?

I wonder if MIC and TKIP is all you need. I've gone out to do a site survey and a Cisco Engineer mentioned to that I don't need to use Radius and just to enable MIC and TKIP, Can someone confirm this?

Thanks.