topic Re: Wireless client static ip address in Wireless

Wireless client static ip address

ibrkic001 — Mon, 05 Jul 2021 20:07:58 GMT

Hello,

is there a enabled "HREAP Local Switching: and enabled option "Learn Client ip address" on WLC can be a problem for static ip addresses on client?

we have problem with wireless connection for Android devices

Point is that we must have static IP addresses on Android devices in order to monitor that devices.

On one area when we have WLC with software version 8.5.135.0 everything works fine, but when we try all this
on area where is WLC with software version 7.0.252.0 , and enabled HREAP , after one period android loses wi-fi connection, and can not obtain again connection for that static IP. We must again switch on DHCP , and then works fine.

best regards

Re: Wireless client static ip address

Rasika Nayanajith — Tue, 13 Apr 2021 20:36:40 GMT

Quiet possible it is due to feature differences between these two code releases

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/201007-AireOS-feature-list-per-release.html#

What is the issue you facing when the client set to DHCP?

HTH

Rasika

Re: Wireless client static ip address

ibrkic001 — Wed, 14 Apr 2021 07:29:53 GMT

When we set client to DHCP, then works fine, with occasional signal loss, and after that client returns on the network, but with settings with static IP address client can not return on network, we must back settings to DHCP.

Regards