EWC-vlan setting concept

vTaroko — Mon, 05 Jul 2021 20:26:41 GMT

Hello,

In the Policy Profile, mapping SSID-10 to VLAN10 and SSID-20 to VLAN20

In the Flex Profile, ONLY setting Native VLAN ID without going to add VLAN-Name and VLAN-ID

As I know, EWC only support FlexConnect-Local Switching not Central Switching.

The setting of VLAN-Name and VLAN-ID in Flex Profile is where we can create VLANs that will be pushed down to the AP.

I don't have anything set up in Flex Profile about VLAN-Name and VLAN-ID, but it still works.

So, what's the correct concept about this VLAN settings in Flex Profile ?

Thanks for your response.

Re: EWC-vlan setting concept

NikolaiErovenko97239 — Tue, 28 Dec 2021 23:10:28 GMT

I make the same config, but point do not want to use a right VLANs. How have you configured VLANs (switch, ports, ewlc)?