CAWAP AP CLI registration check

Wes Schochet — Mon, 05 Jul 2021 20:27:06 GMT

I was trying to figure out if there is a way from the CLI on an AP (a 3702i in this case) if I could tell which controller the AP was actually associated to. I can run a "show capwap client config" to show what the config is, but I have found some cases where the AP is not necessarily connected to that controller, for example if the config has a type-o. Is there a command that will show me which controller the AP is actually taking to?

c3702-test-1#show capwap client conf
configMagicMark 0xF1E2D3C4
chkSumV2 27869
chkSumV1 9192
swVer 17.3.3.26
adminState ADMIN_ENABLED(1)
name c3702-test-1
location Main hallway
group name WAS
mwarName c9800-1-lab
mwarIPAddress 10.3.2.1

Re: CAWAP AP CLI registration check

Leo Laohoo — Mon, 14 Jun 2021 23:51:00 GMT

sh capwap client rcb

Re: CAWAP AP CLI registration check

Wes Schochet — Tue, 15 Jun 2021 16:14:12 GMT

Thank you!

topic Re: CAWAP AP CLI registration check in Wireless

CAWAP AP CLI registration check

Re: CAWAP AP CLI registration check

Re: CAWAP AP CLI registration check