topic Re: AP does not support Flexconnect in Wireless

AP does not support Flexconnect

Neri Gary Cacatian — Wed, 07 Jul 2021 16:34:53 GMT

Hi,

I just want to verify why the below AP doesnt support flexconnect? I Have other AP's like that but it supports Flexconnect.

Product ID AIR-CAP2602E-T-K9
Version ID V01
Serial Number
Entity Name
Entity Description
Certificate Type
FlexConnect Mode supported No

Arshad Safrulla — Wed, 07 Jul 2021 21:04:48 GMT

It supports Flex connect. Depending on the controller you may need to convert it to Flex connect as most of the AP's are in local mode by default.

Neri Gary Cacatian — Wed, 07 Jul 2021 21:14:26 GMT

unfortunately, there is no option for flex connect under the AP mode

Arshad Safrulla — Wed, 07 Jul 2021 21:37:29 GMT

Which controller this AP is reporting to and the code?

Leo Laohoo — Wed, 07 Jul 2021 22:21:26 GMT

What firmware is the controller running on?

Rich R — Thu, 08 Jul 2021 16:10:01 GMT

Like @Leo Laohoo and @farshad already asked and more:

What WLC?

What software version is the WLC running on?

What software is currently running on the AP? (hopefully not a recovery image for example)

What mode is the AP currently in? (for example bridge + flex is not supported on some APs/software versions)

Neri Gary Cacatian — Fri, 09 Jul 2021 20:27:03 GMT

its 7500 with 8.0.141 code.

current software on ap is 7.5

AP mode is currently on local mode

note: there is no option for flexconnect when you drag down from the "AP mode" button