topic Re: Configured Trustpoint at C9800 in Wireless

Configured Trustpoint at C9800

Leftz — Tue, 10 Aug 2021 15:38:20 GMT

Hi The below screen shot is from Configuration ---> Interface ---> Wireless at C9800 wlc. The question is why there is nothing under Configured Trustpoint sometimes, and sometimes it has something over there? Thank you

Re: Configured Trustpoint at C9800

Mark Elsen — Tue, 10 Aug 2021 16:22:11 GMT

- FYI : https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/trustpoints/b-configuring-trustpoints-on-cisco-catalyst-9800-series-controllers/c-workflow-to-configure-a-trustpoint-for-a-third-party-certificate-on-catalyst-9800.html

Review this document and or several cli-show (example) commands, may reveal the 'true status' if the Trustpoint configuration.

Re: Configured Trustpoint at C9800

Arshad Safrulla — Thu, 12 Aug 2021 12:58:32 GMT

Thats the certificate used for wireless management, this certificate is required for AP to join to the WLC and for 9800 physical boxes certificate comes preinstalled for 9800 cloud you need to generate the certificate.

Re: Configured Trustpoint at C9800

Rich R — Thu, 12 Aug 2021 23:30:39 GMT

To your original question: it's probably a cosmetic bug in the GUI. You neglected to mention what version of code this was on - always quote what hardware and software you're using.

As @Mark Elsen suggested - if in doubt use the CLI - the results are generally more reliable then the GUI which uses restconf or netconf (I forget which right now) to read and set the data from the WLC (sometimes has bugs) and uses a lot of script and code to format and display the data on the GUI (many bugs in that).

Re: Configured Trustpoint at C9800

Leftz — Fri, 13 Aug 2021 15:51:04 GMT

Thank you for your reply. Its c9800-L-F with ver 17.5.1