topic Re: AP failed to join the mobility express controller in Wireless

AP failed to join the mobility express controller

shady1 — Sun, 05 Sep 2021 20:12:14 GMT

Hello guys,

I have AP1830 working as mobility express controller and have 27 access points, no vlans configured and dhcp is enabled from a firewall. When I started to connect the AP to the wld, I found only 12 out of the 27 and all the access points are connected on the same switch and I tried to restart the switch, shut and no shut the ports with no success.

Anyone can help to figure out what is the issue.

I attached screenshot from the wld also.

*spamApTask0: Sep 05 23:01:13.268: 2c:31:24:c2:ad:20 WTP Event Request from 10.1.18.8:5264 epoch 1662408073

*spamApTask0: Sep 05 23:01:13.268: 2c:31:24:c2:ad:20 WTP Event Response sent to 10.1.18.8:5264

*spamApTask0: Sep 05 23:01:13.279: 2c:31:24:c2:ad:20 WTP Event Request from 10.1.18.8:5264 epoch 1662408073

*spamApTask0: Sep 05 23:01:13.279: 2c:31:24:c2:ad:20 WTP Event Response sent to 10.1.18.8:5264

*spamApTask0: Sep 05 23:01:13.281: 2c:31:24:c2:ad:20 WTP Event Request from 10.1.18.8:5264 epoch 1662408073

*spamApTask0: Sep 05 23:01:13.281: 2c:31:24:c2:ad:20 WTP Event Response sent to 10.1.18.8:5264

*spamApTask0: Sep 05 23:01:13.403: 2c:31:24:c3:76:20 WTP Event Request from 10.1.18.4:5264 epoch 1662408073

*spamApTask0: Sep 05 23:01:13.403: 2c:31:24:c3:76:20 WTP Event Response sent to 10.1.18.4:5264

*spamApTask0: Sep 05 23:01:14.407: 2c:31:24:c3:76:20 WTP Event Request from 10.1.18.4:5264 epoch 1662408074

*spamApTask0: Sep 05 23:01:14.407: 2c:31:24:c3:76:20 WTP Event Response sent to 10.1.18.4:5264

*spamApTask0: Sep 05 23:01:15.424: 2c:31:24:c3:2d:80 WTP Event Request from 10.1.18.3:5264 epoch 1662408075

*spamApTask0: Sep 05 23:01:15.424: 2c:31:24:c3:2d:80 WTP Event Response sent to 10.1.18.3:5264

*spamApTask0: Sep 05 23:01:15.433: 2c:31:24:c3:2d:80 WTP Event Request from 10.1.18.3:5264 epoch 1662408075

*spamApTask0: Sep 05 23:01:15.433: 2c:31:24:c3:2d:80 WTP Event Response sent to 10.1.18.3:5264

*spamApTask0: Sep 05 23:01:15.437: 2c:31:24:c3:2d:80 WTP Event Request from 10.1.18.3:5264 epoch 1662408075

*spamApTask0: Sep 05 23:01:15.437: 2c:31:24:c3:2d:80 WTP Event Response sent to 10.1.18.3:5264

*spamApTask0: Sep 05 23:01:15.607: 2c:31:24:c3:79:a0 Discovery Request from 10.1.18.15:5248

*spamApTask0: Sep 05 23:01:15.607: 2c:31:24:c3:79:a0 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 50, MaxLicense=50 joined Aps =12
*spamApTask0: Sep 05 23:01:15.607: 2c:31:24:c3:79:a0 apType = 102 apModel:

*spamApTask0: Sep 05 23:01:15.607: 2c:31:24:c3:79:a0 Discovery Response sent to 10.1.18.15:5248

Re: AP failed to join the mobility express controller

Leo Laohoo — Mon, 06 Sep 2021 00:53:52 GMT

Post the complete output to the following commands:

WLC: sh sysinfo
WLC: sh time
AP: sh version
AP: sh capwap ap client rcb

Re: AP failed to join the mobility express controller

shady1 — Mon, 06 Sep 2021 06:50:06 GMT

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.10.142.0
OUI File Last Update Time........................ N/A

System Name...................................... WAP.Controller
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2371
IP Address....................................... 10.1.19.253
Last Reset....................................... 0: unknown

System Up Time................................... 0 days 1 hrs 14 mins 56 secs
System Timezone Location......................... (GMT +3:00) Baghdad
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

Configured Country............................... QA - Qatar

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1

--More-- or (q)uit
Number of Active Clients......................... 4

OUI Classification Failure Count................. 28

Memory Current Usage............................. 69
Memory Average Usage............................. 68
CPU Current Usage................................ 3
CPU Average Usage................................ 3

Flash Type....................................... Compact Flash Card
Flash Size....................................... 1073741824

Burned-in MAC Address............................ 2C:31:24:C2:43:C0
Maximum number of APs supported.................. 50
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1/SHA2

(Cisco Controller) >show time

Time............................................. Mon Sep 6 01:34:28 2021

Timezone delta................................... 0:0
Timezone location................................ (GMT +3:00) Baghdad

NTP Servers
NTP Version.................................. 3
NTP Polling Interval......................... 86400

Index NTP Key Index NTP Server Status NTP Msg Auth Status
---------------------------------------------------------------------------------------------------------------------

AP: sh version

AP Running Image : 8.2.141.0
Primary Boot Image : 8.2.141.0
Backup Boot Image : 0.0.0.0
1 Gigabit Ethernet interfaces
1 802.11 Radios
Radio FW version : 2f195c98fe73445b715e314c6efc689c
NSS FW version : NSS.AK.1.0.c10-00017-E_custC-1.67978.1

Base ethernet MAC Address : 2C:31:24:C2:31:68
Part Number : 0-0000-00
PCA Assembly Number : 074-104694-01
PCA Revision Number : 01
PCB Serial Number : KWC210800TJ
Top Assembly Part Number : 000-00000-00
Top Assembly Serial Number : KWC210800TJ
Top Revision Number : A0
Product/Model Number : AIR-AP1832I-E-K9

AP2C31.24C2.3168#show capwap client rcb
AdminState : ADMIN_ENABLED
OperationState : DISCOVERY
Name : AP2C31.24C2.3168
SwVer : 8.2.141.0
HwVer : 1.0.0.0
MwarMacAddr : ff:ff:ff:ff:00:00
MwarApMgrIp : 0.0.0.0
MwarName :
MwarHwVer : 0.0.0.0
Location : default location
ApMode : Local
ApSubMode : Not Configured
CAPWAP Path MTU : 576
AP Link DTLS Encryption : OFF
AP Tcp MSS Adjust : Disabled
LinkAuditing : disabled

Re: AP failed to join the mobility express controller

shady1 — Mon, 06 Sep 2021 06:52:07 GMT

Thanks for your reply. please check the attached

Re: AP failed to join the mobility express controller

Leo Laohoo — Mon, 06 Sep 2021 07:14:46 GMT

Controller is running 8.10.X.X but the AP is still running 8.2.X.X.

Does the AP have a valid IP address?

Console into the AP and reboot. Post the entire boot-up process.

Re: AP failed to join the mobility express controller

shady1 — Mon, 06 Sep 2021 07:42:23 GMT

Please find the attached. for the version, all the access points was on the same old version and 12 of them joined the wlc then updated through tftp

Re: AP failed to join the mobility express controller

Leo Laohoo — Mon, 06 Sep 2021 08:50:18 GMT

@shady1 wrote:

[*04/27/2017 17:58:22.2971] ethernet_port wired0, ip 10.1.18.12, netmask 255.255.254.0, gw 10.1.19.254, mtu 1500, bcast 10.1.19.255, dns1 192.168.100.1, vid 0, static_ip_failover false, dhcp_vlan_failover false

Ok, so the AP gets a valid IP address, however, the time and date of the AP is wrong.
This AP may never have joined a controller before.

Can the AP ping the WLC?

Re: AP failed to join the mobility express controller

shady1 — Mon, 06 Sep 2021 08:56:01 GMT

yes AP ping the WLC

Re: AP failed to join the mobility express controller

Leo Laohoo — Mon, 06 Sep 2021 10:42:18 GMT

Console into the AP and enter the following command:

capwap ap primary-base <WLC NAME> <WLC MANAGEMENT IP ADDRESS>

Re: AP failed to join the mobility express controller

shady1 — Mon, 06 Sep 2021 10:50:01 GMT

Unfortunately, i tried before with no success

is there a away to upgrade the access point through cli.

i also tried to convert the capwap to mobility express with no success ( PS. I disconnected the wlc)

Re: AP failed to join the mobility express controller

Arshad Safrulla — Mon, 06 Sep 2021 11:56:51 GMT

You have 2 options,

One upgrade the AP manually using the below command, download the lightweight ap image from cisco

archive download-sw /reload <source iamge>

Or connect a TFTP server to the ME controller and host the AP images in the TFTP root. This AP image bundle also can be downloaded from the Cisco site. It's zip file u need to unzip it in the tftp root directory. TFTP server configuration is under management==>software upgrade, transfer mode tftp or whatever you prefer, set the tftp ip, file path /, ) Configure the tftp parameters and save. Remember each time when an ap joins this tftp server has to be available

Re: AP failed to join the mobility express controller

shady1 — Mon, 06 Sep 2021 13:32:54 GMT

I tried the second option already and upgraded the connected access points but my problem is to connect the remaining access points

I will try to update manually the access point but i found only on Cisco the software to upgrade to ME. Is this the right one to download or not

Re: AP failed to join the mobility express controller

Arshad Safrulla — Mon, 06 Sep 2021 19:23:38 GMT

Hi Shady1.

You can find the AP images from Cisco software download page.

As you can see in the above screencap, the below highlighted ZIP file contains the AP images for all the AP models for that particular ME code. Just unzip and put it in the TFTP root. Then just configure the TFTP server as per my previous post. You can also refer to the below post for more infomration

https://www.wiresandwi.fi/blog/cisco-mobility-express-image-management-using-tftp-server

Re: AP failed to join the mobility express controller

shady1 — Tue, 07 Sep 2021 09:30:56 GMT

Hello, I tried to update one access point manually, but the issue now that i cannot access the controller to check if it will be joined the wlc or not. i tried also to reset the controller and configure again and used static IP address and still cannot access it.

any suggestion!!