topic Re: Batch convert autonomous APs to LWAPPs in Wireless

Batch convert autonomous APs to LWAPPs

sSiDs — Mon, 06 Sep 2021 15:03:50 GMT

Hi team!

We have bought 125 of AIR-CAP2702I-A-K9/

it will be a nightmare to upload one by one lwapp ios on each... O_o

is there any option to convert them by plugging in Ethernet?

I have a DNS record of controller and DHCP pool with hex 43 option.

I meaning is there any possibility to force download lwapp and after they will auto join to WLC?

thanks in advance)

Re: Batch convert autonomous APs to LWAPPs

balaji.bandi — Mon, 06 Sep 2021 16:01:38 GMT

check the comparability with WLC - yes WLC do upgrade automatically when they join WLC

example :

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/68835-wlc-upgrade.html

https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

Re: Batch convert autonomous APs to LWAPPs

sSiDs — Mon, 06 Sep 2021 17:33:06 GMT

Sorry, but you misunderstand my question.

all 125 APs are with k9w7...

1. manually convert to k9w8 one by one....dont want to... 😞

2. any kind of batch procedure to convert them all from AUTONOMOUS to LWAPP

how they will join to controller with autonomous SW?

only LWAPP can join

Re: Batch convert autonomous APs to LWAPPs

Leo Laohoo — Mon, 06 Sep 2021 23:19:28 GMT

Make sure to prepare a valid RCV file, like ap3g2-rcvk9w8-tar.153-3.JK6.tar.

Here are the steps to convert them to CAPWAP:

1. Erase the config: write erase default

NOTE: This command is important because it will erase the static IP address of the AP.

2. Reboot the AP and let the AP get a DHCP IP address.

3. Use this command to push the RCV file into the AP: archive download-sw /reload /overwrite tftp://<TFTP_IP_ADDRESS>/ap3g2-rcvk9w8-tar.153-3.JK6.tar

Re: Batch convert autonomous APs to LWAPPs

balaji.bandi — Mon, 06 Sep 2021 23:35:41 GMT

. manually convert to k9w8 one by one....dont want to...

reset to Facotry - so onboarding process kick off, whem you plugin AP (make sure you have DHCP option 43 setup with controller)

Re: Batch convert autonomous APs to LWAPPs

sSiDs — Tue, 07 Sep 2021 08:33:53 GMT

so if i get you right, i need every autonomous AP convert to CAPWAP (lwapp) with same RCV as WLC aireOS

Autonomous AP cannot join to WLC and convert itself by downloading lwapp ios form WLC?

Re: Batch convert autonomous APs to LWAPPs

Leo Laohoo — Tue, 07 Sep 2021 08:36:22 GMT

@sSiDs wrote:

so if i get you right, i need every autonomous AP convert to CAPWAP (lwapp) with same RCV as WLC aireOS

Autonomous AP cannot join to WLC and convert itself by downloading lwapp ios form WLC?

No possible.

Autonomous IOS does not understand what a WLC is.

Re: Batch convert autonomous APs to LWAPPs

sSiDs — Tue, 07 Sep 2021 08:40:09 GMT

yes, I know that)

my fisrt post was about any kind of lifehack how to convert APs in a batch...not 1 by 1...it will take a very long time...

i will teach anykey guy))) because i don't want to...))) i am old and lazy 🙂

Re: Batch convert autonomous APs to LWAPPs

Leo Laohoo — Tue, 07 Sep 2021 08:50:12 GMT

@sSiDs wrote:

i am old and lazy

Are there any "interns" available to do the job?

Re: Batch convert autonomous APs to LWAPPs

sSiDs — Wed, 29 Sep 2021 07:23:48 GMT

yeah))) have found a couple of them...

Re: Batch convert autonomous APs to LWAPPs

Leo Laohoo — Wed, 29 Sep 2021 08:28:40 GMT

Nice!