topic Cisco Access Point C9115AXI-E device density in Wireless

Cisco Access Point C9115AXI-E device density

litto.sunny — Sun, 26 Sep 2021 06:46:28 GMT

I would appreciate if you can help me to understand the max number of simultaneous devices the Cisco AP, C9115AXI-E can support in a high density deployment.

Re: Cisco Access Point C9115AXI-E device density

Leo Laohoo — Sun, 26 Sep 2021 07:01:48 GMT

@litto.sunny wrote:

a high density deployment.

Depends on the network and depends on the wireless traffic.

I have AP3700 that have >60 daily wireless clients but because the traffic is only trivial (emails, IM, social networking, occasional HD video, VoIP) I have not heard of any complaints.

@litto.sunny wrote:

help me to understand the max number of simultaneous devices

Every time someone asks how-many-clients-per-AP, I always recommend getting a wireless site survey done correctly.

Re: Cisco Access Point C9115AXI-E device density

litto.sunny — Sun, 26 Sep 2021 07:57:47 GMT

@Leo Laohoo: Thank you for the reply and appreciate it. Just wondering whether it is documented in Cisco about the simultaneous devices connectivity and performance of this AP, C9115AXI. This AP works well in density deployments, but just thinking about performance degrade if the simultaneous devices are more than 200 in any case. Example: Indoor emergency common meeting areas, Training Rooms, Canteen, theaters..etc.

Re: Cisco Access Point C9115AXI-E device density

Leo Laohoo — Sun, 26 Sep 2021 11:05:13 GMT

@litto.sunny wrote:

Just wondering whether it is documented in Cisco about the simultaneous devices connectivity and performance of this AP, C9115AXI.

Like I said before, it depends on the traffic.
Connecting to a single AP is one thing. Simultaneous traffic is another. Sure, I can get 200 wireless clients to connect to an AP. No problem. 200 wireless clients simultaneously pulling traffic? Now that is where the "right question" needs to be answered.

When I deploy APs to training room, it is usually N+1. If the training room has a capacity of 35, I would always deploy two APs.
The method-to-the-madness is as follows:

Each person has 2.0 to 2.5 wireless client
There is no guarantee the wireless client will "behave" (aka, join the CLOSEST AP). Putting a 2nd AP will minimize the chance.
Redundancy.

Let me reiterate what I said earlier: Get a wireless site survey done properly.

Re: Cisco Access Point C9115AXI-E device density

litto.sunny — Mon, 27 Sep 2021 09:44:30 GMT

@Leo Laohoo: Thank you appreciate your comments.