topic Re: Access point SSID not showing in Wireless

Access point SSID not showing

Aziz.zahrani — Sun, 31 Oct 2021 12:31:14 GMT

Dear All

I have more than 50 AP (cisco aironet 1142) ,switch and WLC.

befor 3 days power outage occurred after resetart some of the AP can not showing the name of WiFi .

i take internet from the switch to my laptop by cable it is work.

but when i try to connect to WiFi it is not showing on the laptop or iphone or any device

the AP is working and light is green.

thank you

Mark Elsen — Sun, 31 Oct 2021 14:44:12 GMT

- Check the status of the radio's on those AP's through the controller GUI.

balaji.bandi — Sun, 31 Oct 2021 16:01:44 GMT

Do you mean SSID, not broadcasting, and user device not able to see SSID?

check the AP group has that SSID?

check WLAN config and SSID config might have lost or not saved before power outage ?

Aziz.zahrani — Tue, 02 Nov 2021 08:49:23 GMT

can you explain it more for me becuse i don't have experince on it .

thank you

Mark Elsen — Tue, 02 Nov 2021 10:07:48 GMT

- Check this guide :

Aziz.zahrani — Sat, 06 Nov 2021 16:55:44 GMT

Yes i mean that .

and i check AP groups i don’t find any AP there .

How can i add AP to group from GUI ?

thank you

balaji.bandi — Sat, 06 Nov 2021 19:52:45 GMT

Choose WLANs > Advanced > AP Groups to open the AP Groups page.

You see add and remove left side added, right side AP available to Add ( AP reboot once you add to AP Group)

Aziz.zahrani — Sun, 07 Nov 2021 13:37:19 GMT

if you have a videos palease put the link

thank you

balaji.bandi — Sun, 07 Nov 2021 14:11:41 GMT

Have you come across any time Youtube.com ?

"How to add AP to AP Group using Cisco WLC GUI" - type in google. com - then click Videos, you find plenty...