topic Re: Change power level at AP3802 in Wireless

Change power level at AP3802

Leftz — Tue, 09 Nov 2021 23:15:05 GMT

Hi WLC 5520 with AP3802I has the below screenshot. We want to change Power level, but it cannot be changed as it is grayed out. Anyone has some suggestions? Thank you

Re: Change power level at AP3802

Leo Laohoo — Wed, 10 Nov 2021 01:30:33 GMT

Maybe because the Regulatory Domain does not match?

Re: Change power level at AP3802

Leftz — Wed, 10 Nov 2021 04:33:24 GMT

Thank you Leo! I checked Regulatory Domain. Its -B. It should be right

Re: Change power level at AP3802

Leo Laohoo — Wed, 10 Nov 2021 04:43:04 GMT

Post the complete output to the following commands:

WLC: sh sysinfo
AP: sh version

Re: Change power level at AP3802

Leftz — Thu, 11 Nov 2021 22:34:50 GMT

removed

Re: Change power level at AP3802

Arshad Safrulla — Thu, 11 Nov 2021 20:17:52 GMT

Hi, Are you trying these changes under Wirelsss>>Dual Band Radios

you may be trying to work in the XOR antenna, if you have this in 5Ghz it always works in the lowest power level possible. I doubt you will not be able to change it.

Re: Change power level at AP3802

Leftz — Thu, 11 Nov 2021 21:51:14 GMT

Hi Arshadsaf, Thank you for your reply. I got it. Let me share it. Go to Radio Role Assignment -----> check Manual first