WLAN AP C9130AXI-E session timeout

Gehrig_W — Tue, 16 Nov 2021 08:03:53 GMT

Hello Cisco WLAN Experts,

I'm busy with Cisco TAC to troubleshoot a SIP-call-problem via WLAN.

We would like to debug a little on a new Cisco AP C9130AXI-E and to enter "devshell".

But unfortunatly, my terminal-session is closed after short time of inactivity.

On 2800-WLAN-APs I used the following command to avoid this:

AP # debug capwap console cli

AP # config t

AP(config) # line console 01

AP (config-line) # exec-timeout 0

AP (config-line) #

These commands are no longer working on the new C9130AXI-E WLAN AP.

Who knows the command to avoid premature terminal session disconnect ?

Please check and come back with information.

I found the command by myself in the meantime.

After entering the enbale-command, the command exec-timeout is available.

Thank You

Wini

Re: WLAN AP C9130AXI-E session timeout

Arshad Safrulla — Tue, 16 Nov 2021 08:45:58 GMT

devshell is accessible only by Cisco TAC. I highly recommend not to play with this unless directed by TAC.

The command you referring to in COS-AP sets the session timeout for privilege mode and config mode.