topic Re: AP2803I is not joining the WLC C9800 in Wireless

AP2803I is not joining the WLC C9800

osman869 — Wed, 15 Dec 2021 09:45:10 GMT

Hi,

I have an AP 2803 version 8.4 and WLC c9800 version 17.6.2

DHCP is enabled on WLC and AP is getting the IP but its showing this only.

(AP and WLC can ping each other)

AP>[*06/18/2019 07:13:28.8565] CAPWAP State: Discovery
[*06/18/2019 07:13:28.8576] Discovery Request sent to 10.80.102.12, discovery type STATIC_CONFIG(1)
[*06/18/2019 07:13:28.8592] Discovery Request sent to 10.80.102.12, discovery type STATIC_CONFIG(1)
[*06/18/2019 07:13:28.8602] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)

Re: AP2803I is not joining the WLC C9800

Leo Laohoo — Wed, 15 Dec 2021 10:01:40 GMT

@osman869 wrote:

[*06/18/2019 07:13:28.8576]

Look at the time and date.

Re: AP2803I is not joining the WLC C9800

Mark Elsen — Wed, 15 Dec 2021 12:12:41 GMT

- Also configure NTP on the 9800 , and or use an ntp service/server

Re: AP2803I is not joining the WLC C9800

David Ritter — Wed, 15 Dec 2021 18:39:24 GMT

Don't forget to configure/enable the Wireless Management Interface on the 9800

Re: AP2803I is not joining the WLC C9800

osman869 — Thu, 16 Dec 2021 05:13:19 GMT

Thank you, this joined the AP.