topic Show power status - 9800-40 in Wireless

Show power status - 9800-40

thewifidude — Mon, 17 Jan 2022 14:48:06 GMT

Anyone know how to view the power supply status? I got notified by NOC that PSU0 failed but I can only check inventory status on controller. You used to be able to determine power supply status right on the front page in AireOS.

Re: Show power status - 9800-40

Arshad Safrulla — Mon, 17 Jan 2022 15:03:52 GMT

sh environment all in CLI

Re: Show power status - 9800-40

thewifidude — Mon, 17 Jan 2022 16:17:01 GMT

This doesn't give me a status whether it is failed or not. Just voltage readings.

Sensor List: Environmental Monitoring
Sensor Location State Reading
Vin P0 Normal 206 V AC
Iin P0 Normal 1 A
Vout P0 Normal 12 V DC
Iout P0 Normal 9 A
Temp1 P0 Normal 26 Celsius
Temp2 P0 Normal 23 Celsius
Temp3 P0 Normal 30 Celsius
Vin P1 Normal 204 V AC
Iin P1 Normal 1 A
Vout P1 Normal 12 V DC
Iout P1 Normal 10 A
Temp1 P1 Normal 24 Celsius
Temp2 P1 Normal 22 Celsius
Temp3 P1 Normal 26 Celsius
VRRX1: VX1 R0 Normal 749 mV
VRRX1: VX2 R0 Normal 6874 mV
VRRX1: VX3 R0 Normal 1214 mV
VRRX1: VX5 R0 Normal 1214 mV
VRRX1: VP1 R0 Normal 1711 mV
VRRX1: VP2 R0 Normal 2488 mV
VRRX1: VP3 R0 Normal 1308 mV
VRRX1: VP4 R0 Normal 5066 mV
VRRX1: VH R0 Normal 11914 mV
VRRX2: VX1 R0 Normal 852 mV
VRRX2: VX4 R0 Normal 1013 mV
VRRX2: VX5 R0 Normal 1014 mV
VRRX2: VP1 R0 Normal 3301 mV
VRRX2: VP3 R0 Normal 1806 mV
VRRX2: VP4 R0 Normal 1052 mV
VRRX2: VH R0 Normal 11924 mV
VRRX3: VX1 R0 Normal 995 mV
VRRX3: VX2 R0 Normal 1004 mV
VRRX3: VX4 R0 Normal 750 mV
VRRX3: VX5 R0 Normal 749 mV
VRRX3: VP1 R0 Normal 2485 mV
VRRX3: VP2 R0 Normal 1195 mV
VRRX3: VP3 R0 Normal 1510 mV
VRRX3: VP4 R0 Normal 1514 mV
VRRX3: VH R0 Normal 11940 mV
Temp: RCRX IN R0 Normal 24 Celsius
Temp: RCRX OUT R0 Normal 36 Celsius
Temp: Yoda R0 Normal 41 Celsius
Temp: XEPhy R0 Normal 44 Celsius
Temp: CPU Die R0 Normal 43 Celsius
Temp: FC FANS R0 Fan Speed 50% 24 Celsius

Re: Show power status - 9800-40

Mark Elsen — Mon, 17 Jan 2022 16:21:21 GMT

>.... I got notified by NOC that PSU0 failed

How was this message received and or which notification-protocol was used by the controller -> show the exact message too. Perhaps show tech can provide more info's (not sure).

Re: Show power status - 9800-40

thewifidude — Mon, 17 Jan 2022 16:27:02 GMT

just that Chassis 1 Power Supply Module 0 - failed

via SNMP

I'll just submit a TAC. Hard to believe there's no easy status to check on these hot swappable components.

Re: Show power status - 9800-40

Rich R — Tue, 18 Jan 2022 17:52:35 GMT

Try:

show log

show env summ (min/major alarms in last column)

show facility-alarm status

agreed it's weird that they've removed the PSU status from the show env output!

Re: Show power status - 9800-40

thewifidude — Fri, 28 Jan 2022 21:00:33 GMT

Show platform is the command. Wish this was still in the GUI.

Chassis type: C9800-40-K9

Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 C9800-40-K9 ok 17w2d
0/0 BUILT-IN-4X10G/1G ok 17w2d
R0 C9800-40-K9 ok, active 17w2d
F0 C9800-40-K9 ok, active 17w2d
P0 C9800-AC-750W-R ok 17w2d
P1 C9800-AC-750W-R ok 17w2d
P2 C9800-40-K9-FAN ok 17w2d

Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 19030712 16.10(2r)
R0 19030712 16.10(2r)
F0 19030712 16.10(2r)