topic Re: WCS Upgrade in Wireless

WCS Upgrade

stheriault99 — Sun, 04 Jul 2021 02:08:37 GMT

HI,

I need to upgrade my WCS server from version 4.1.83.0 to version 7.0.164.0. Can somebody tell me if I can do a one step upgrade, or if I need to do multiple updates before updating to version 7.0.164.0.

Also, where can I get my hands on these different versions?

Thanks.

Re: WCS Upgrade

Rob Huffman — Wed, 01 Sep 2010 21:10:24 GMT

Hi there,

Here is an excellent review of this upgrade path from Rollin @ Cisco

https://supportforums.cisco.com/message/3154798#3154798

Cheers!

Rob

Re: WCS Upgrade

stephenwa — Thu, 09 Sep 2010 19:51:45 GMT

I don't think you can go directly to 7.x from 4.x

I believe you will need to upgrade to WCS 5.x.x. before upgrading to 7.0.164.0...

Check out the attached release notes for 7.0.164.0 and it will explain what interim version of 5.x.x.x code will be required.

Re: WCS Upgrade

George Stefanick — Fri, 10 Sep 2010 00:55:35 GMT

If you have software support on your WCS. I would open a call with TAC just to make double sure. I live by the moto "If you pay for it use it" "But learn as you go"

Re: WCS Upgrade

Peter Nugent — Sat, 11 Sep 2010 12:25:09 GMT

You cannot use the autonmated upgrade path you would have to do it manually.

The documentation says automated works from 4.1.191.0 however I think the lowest code I have done it from is 4.2.

Refer to the WCS v7.0 user guide its cvered quite well in there.