topic Description in dashboard in Wireless

Description in dashboard

david.williams2020 — Thu, 24 Feb 2022 08:11:26 GMT

Good Morning,

On my dashboard most of the devices that are connected to our WiFi identify themselves by MAC Address but some don't as below, is this a problem on the device end?

Any ideas how to get all my devices to identify meaningfully?

Thanks

Dave

Re: Description in dashboard

Mark Elsen — Thu, 24 Feb 2022 08:17:46 GMT

- Presumably this may only work by devices which can be served by DHCP (only). Btw , (from) which dashboard/app are you mentioning this , include cisco product and software version when posting.

Re: Description in dashboard

balaji.bandi — Thu, 24 Feb 2022 10:38:14 GMT

it rquired your DHCP and DNS resolution configured correctly

what DHCP Server you using ?

Re: Description in dashboard

Arshad Safrulla — Thu, 24 Feb 2022 12:05:08 GMT

Hi,

Meraki devices are capable of using NBAR/ Layer 7 inspection identify protocols and applications. It also uses snooping of DHCP, bonjour or Netbios to identlfy the device hostname. Devices by default advertise it's configured hostname over these protocols. More info below;

Rename a Client's Hostname - Cisco Meraki

Re: Description in dashboard

Scott Fella — Thu, 24 Feb 2022 17:08:37 GMT

David,

You know that there is a Meraki forum and those folks are pretty knowledgable about Meraki. I see the same thing at my home, but only really the phones and laptops show up with the device names. A lot of my iot devices, I rename so I don't have to try to look it up.