topic Remove http at wlc 8.5. in Wireless

Remove http at wlc 8.5.

Leftz — Mon, 21 Mar 2022 18:04:29 GMT

Hi WLC 8.5.140.0 needs to remove http for security reason. Is it possible to remove it without upgrading ios? thanks

Flavio Miranda — Mon, 21 Mar 2022 18:50:57 GMT

You dont need to upgrade. Just go to the management tab HTTP Access and disable it. It will be required to reload that WLC.

Leftz — Mon, 21 Mar 2022 20:25:08 GMT

Thank you for your reply. If it is 9800wlc, the action would need to use some commands, such as

parameter-map type webauth global
webauth-http-enable

Not sure if these commands can be used for this kind of wlc or having other commands for it

Haydn Andrews — Mon, 21 Mar 2022 21:22:46 GMT

CLI to disable HTTP
config network webmode disable

to enable https

config network secureweb enable

Flavio Miranda — Mon, 21 Mar 2022 21:57:38 GMT

Allright, you didn´t mention it is 9800. In this case, it is IOS-XE, which means, you need to run the command:

no ip http server.

no reload is necessary.

Previously I though it would be AirOS.