topic Cisco WLC new config in Wireless

Cisco WLC new config

frederick.mercado — Thu, 19 Oct 2023 20:01:50 GMT

Hi! So I am fairly new to the WLC game.

I have my 9800 LC controller setup and I can reach it on my VLAN setup for wireless, but would like to use the service port or OOB for management. Not the in bound.

Re: Cisco WLC new config

Haydn Andrews — Thu, 24 Mar 2022 23:43:39 GMT

Remember the service port is in the management VRF so you also need to update the routing for that subnet on the WLC.

interface GigabitEthernet0/0

description SP_out_of_band

vrf forwarding Mgmt-intf

ip address 10.58.55.246 255.255.255.0

negotiation auto

ip route vrf Mgmt-intf 10.58.0.0 255.255.0.0 10.58.55.254

Re: Cisco WLC new config

balaji.bandi — Fri, 25 Mar 2022 08:16:29 GMT

follow below guide : (service port config)

https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html