topic Re: air-ap 2802i-e-k9 web interface in Wireless

air-ap 2802i-e-k9 web interface

waled1990 — Thu, 14 Apr 2022 22:42:22 GMT

Hi everyone, i have a 2802i-e-k9 running mobility express version 8.10.171.0 (converted from lightweight)

i would just like to find out how to access/enable the ap web page if it has one. Similar to below, can get to mobility express config fine. thanks in advance

Re: air-ap 2802i-e-k9 web interface

Flavio Miranda — Thu, 14 Apr 2022 22:50:50 GMT

If it is realy ME, web page should be there by default. Do you have access to it somehow?

Re: air-ap 2802i-e-k9 web interface

balaji.bandi — Thu, 14 Apr 2022 23:30:07 GMT

i followed the below guide to make my Wireless AP to Me simple steps: GUI works as expected.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_Cisco_Mobility_Express_Deployment_Guide/b_Cisco_Mobility_Express_Deployment_Guide_chapter_010.html

below video steps :

https://www.youtube.com/watch?v=38f5VLp-qnI

Re: air-ap 2802i-e-k9 web interface

Rich R — Fri, 15 Apr 2022 14:16:05 GMT

You've misunderstood what ME is. The screenshot you're showing is for an autonomous AP. That doesn't exist anymore. The ME WLC GUI is where the AP is monitored, viewed and configured now - there is no GUI for the AP.

The only AP GUI which can be found on a CAPWAP AP is the Office Extend AP config pages

https://mrncciew.com/2013/01/15/configuring-oeap/

But OEAP is not supported on ME.

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/feature-matrix/ap-feature-matrix.html#_Toc87523902