topic Re: vWLC AP Join Request failed! in Wireless

vWLC AP Join Request failed!

JustTakeTheFirstStep — Thu, 14 Apr 2022 03:52:51 GMT

Virtual WLC
version : 8.10.151

IP : 192.168.41.100

AP
PID: C9130AXI-K

IP : 10.0.15.251

AP6C71.0DF2.5B94#ping 192.168.41.100
Sending 5, 100-byte ICMP Echos to 192.168.41.100, timeout is 2 seconds
!!!!!

AP tries to join with WLC but gets "AP Join Request failed!"

Attach the debug log.
Can anyone help me?

Re: vWLC AP Join Request failed!

Flavio Miranda — Thu, 14 Apr 2022 04:00:04 GMT

Make sure data, time, time zona is ok

Make sure AP country code is enable on wlc.

Re: vWLC AP Join Request failed!

JustTakeTheFirstStep — Thu, 14 Apr 2022 06:13:06 GMT

The country code and time are both normal.
In the signup status menu I found the reason.
"No license present with the AP trying to join"
But I still don't know what the problem is.

Re: vWLC AP Join Request failed!

Flavio Miranda — Thu, 14 Apr 2022 10:50:55 GMT

But did you fixed the licensing problem? MANAGEMENT> Software Activation>Licenses

Re: vWLC AP Join Request failed!

JustTakeTheFirstStep — Thu, 14 Apr 2022 14:42:13 GMT

License is already active..

Re: vWLC AP Join Request failed!

Flavio Miranda — Thu, 14 Apr 2022 14:45:49 GMT

and did you reload the wlc after activated?

Cause the message is pretty clear. "No license present with the AP trying to join"

Re: vWLC AP Join Request failed!

JustTakeTheFirstStep — Sun, 17 Apr 2022 07:23:26 GMT

I restart vWLC but the result is the same..

haha..

Re: vWLC AP Join Request failed!

Ambuj M — Sun, 17 Apr 2022 11:20:31 GMT

Share output of show license summary

Re: vWLC AP Join Request failed!

JustTakeTheFirstStep — Sun, 17 Apr 2022 13:39:55 GMT

Re: vWLC AP Join Request failed!

Ambuj M — Sun, 17 Apr 2022 14:28:54 GMT

Looks like you added 30 license count later, in the print short above this was not showing. Anyways your license looks good. In the original debug I don’t see any join response and did not find any caveat, is it still the case after adding 30 licenses. If it is it’s worth reloading the controller once. Seems like WLC is not even initiating a join response.

Re: vWLC AP Join Request failed!

JustTakeTheFirstStep — Mon, 25 Apr 2022 04:32:55 GMT

You were right.

AP is connected after reboot.

I don't know why I had to reboot, but I'm glad it was fixed.