topic Re: How to adjust tx power of APs in 9800? in Wireless

How to adjust tx power of APs in 9800?

JustTakeTheFirstStep — Fri, 27 May 2022 03:32:14 GMT

How to adjust tx power of APs in 9800?

Re: How to adjust tx power of APs in 9800?

Kasun Bandara — Fri, 27 May 2022 04:35:30 GMT

you can use RRM in WLC

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/radio-resource-management.html#ID76

Re: How to adjust tx power of APs in 9800?

Rasika Nayanajith — Fri, 27 May 2022 05:09:13 GMT

If you need an individual AP level, you can go to "Configuration -> Wireless -> Access Point > {2.4|5.0GHz}". See below

If you need WLC to decide globally you can let RRM do it (Configuration -> Radio Configuration -> RRM -> TPC)

HTH

Rasika

*** Pls rate all useful responses ***

Re: How to adjust tx power of APs in 9800?

pronko8901 — Wed, 11 Oct 2023 19:23:18 GMT

hi,please help ,i cant see m to find Role assignment?

Re: How to adjust tx power of APs in 9800?

Gaurav Kansal — Wed, 18 Oct 2023 08:56:31 GMT

Dear Snika,

You can adjust power of access point from Configuration>Wireless>Access points> 5Ghz or 2.4Ghz access point configuration page. You can change it from global setting to custom.

Note: It is recommended to leave this power assignment as global and let WLC do its job.

Re: How to adjust tx power of APs in 9800?

pronko8901 — Thu, 19 Oct 2023 07:29:25 GMT

Hi thank you so much, this worked