topic Re: WLC 9800 There is an install operation in progress. Please wait in Wireless

WLC 9800 There is an install operation in progress. Please wait

rafafilho11 — Thu, 26 May 2022 13:22:18 GMT

After Upgrade From 17.3.4 to 17.3.5 even with all commited changes done the message show up on the GUI:

There is an install operation in progress. Please wait till it completes

The upgrade was done by ISSU, all other functions on the WLC is working fine, despites de message above

show install active
[ Chassis ] Active Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!
SMU C bootflash:C9800-L-universalk9_wlc.17.03.05a.CSCwb13784.SPA.smu.bin
IMG C 17.03.05a.0.7

[ chassis 1/R0 ] Active Package(s) Information:
display_file_contents: START Thu May 26 08:48:13 GMT 2022
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!
SMU C bootflash:C9800-L-universalk9_wlc.17.03.05a.CSCwb13784.SPA.smu.bin
IMG C 17.03.05a.0.7

[ chassis 2/R0 ] Active Package(s) Information:
display_file_contents: START Thu May 26 08:48:14 GMT 2022
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!
SMU C bootflash:C9800-L-universalk9_wlc.17.03.05a.CSCwb13784.SPA.smu.bin
IMG C 17.03.05a.0.7

show issu state detail
Current ISSU Status: Enabled
Previous ISSU Operation: Successful
=======================================================
System Check Status
-------------------------------------------------------
Platform ISSU Support Yes
Standby Online Yes
Autoboot Enabled Yes
SSO Mode Yes
Install Boot Yes
Valid Boot Media Yes
=======================================================
No ISSU operation is in progress

show install inactive
[ Chassis ] Inactive Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
No Inactive Packages

[ chassis 1/R0 ] Inactive Package(s) Information:
display_file_contents: START Thu May 26 08:45:49 GMT 2022
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
No Inactive Packages

[ chassis 2/R0 ] Inactive Package(s) Information:
display_file_contents: START Thu May 26 08:45:51 GMT 2022
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
No Inactive Packages

show install committed
[ Chassis ] Committed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!
SMU C bootflash:C9800-L-universalk9_wlc.17.03.05a.CSCwb13784.SPA.smu.bin
IMG C 17.03.05a.0.7

[ chassis 1/R0 ] Committed Package(s) Information:
display_file_contents: START Thu May 26 08:47:03 GMT 2022
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!
SMU C bootflash:C9800-L-universalk9_wlc.17.03.05a.CSCwb13784.SPA.smu.bin
IMG C 17.03.05a.0.7

[ chassis 2/R0 ] Committed Package(s) Information:
display_file_contents: START Thu May 26 08:47:05 GMT 2022
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!
SMU C bootflash:C9800-L-universalk9_wlc.17.03.05a.CSCwb13784.SPA.smu.bin
IMG C 17.03.05a.0.7

show install summary
[ Chassis ] Installed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!
SMU C bootflash:C9800-L-universalk9_wlc.17.03.05a.CSCwb13784.SPA.smu.bin
IMG C 17.03.05a.0.7
!WARNING: File(s) are incompatible with the running image

Re: WLC 9800 There is an install operation in progress. Please wait

Mark Elsen — Thu, 26 May 2022 14:13:21 GMT

- Verify and or post output of : wlc# show issu state detail

Re: WLC 9800 There is an install operation in progress. Please wait

rafafilho11 — Thu, 26 May 2022 14:23:49 GMT

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.05.26 08:39:50 =~=~=~=~=~=~=~=~=~=~=~=
show issu state detail
Current ISSU Status: Enabled
Previous ISSU Operation: Successful
=======================================================
System Check Status
-------------------------------------------------------
Platform ISSU Support Yes
Standby Online Yes
Autoboot Enabled Yes
SSO Mode Yes
Install Boot Yes
Valid Boot Media Yes
=======================================================
No ISSU operation is in progress

Re: WLC 9800 There is an install operation in progress. Please wait

Mark Elsen — Thu, 26 May 2022 16:38:09 GMT

- For the time being I would consider the original message as harmless and ignore it (keep using the controller(s)). Sometimes these are left overs from processes supposing to give a final-OK status , not done, but they have finished doing their job. You may want to configure a syslog server on the controller, keep watching messages at regular intervals , check if anything comes up related to this.

- Some other 'good stuff' : - on controller use CLI/SSH : show tech wireless , have the output analyzed by : https://cway.cisco.com/tools/WirelessAnalyzer/ , you will find lots of advisories about the current configuration.

Re: WLC 9800 There is an install operation in progress. Please wait

rafafilho11 — Thu, 26 May 2022 16:42:04 GMT

Some other 'good stuff' : - on controller use CLI/SSH : show tech wireless , have the output analyzed by : https://cway.cisco.com/tools/WirelessAnalyzer/ , you will find lots of advisories about the current configuration.

I got the show tech-suport analyzed by the Wireless Analyzer, but no sucessfull related to the message:

There is an install operation in progress. Please wait

So, it's seems to be something like a bug, because on the cli output we can see the new software as "commited"

Re: WLC 9800 There is an install operation in progress. Please wait

Mark Elsen — Thu, 26 May 2022 16:48:25 GMT

- Ok . remember that for Wireless Analyzer it really needs : show tech wireless , not simply show tech-support , if done than it is to be considered as a harmless bug (indeed) , remember to use a syslog server too.

Re: WLC 9800 There is an install operation in progress. Please wait

Leo Laohoo — Fri, 27 May 2022 02:05:11 GMT

@rafafilho11 wrote:

--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!
SMU C bootflash:C9800-L-universalk9_wlc.17.03.05a.CSCwb13784.SPA.smu.bin
IMG C 17.03.05a.0.7

How is that even possible? That is not suppose to work.

The WLC is on 17.3.5a so the SMU/APSP/APDP should only "accept" the same version. It should reject the APSP meant for a different version.
I have seen this exact issue when applying 16.12.4 SMU.

I suspect the APSP will need to be manually uninstalled or removed.

Re: WLC 9800 There is an install operation in progress. Please wait

rafafilho11 — Fri, 27 May 2022 02:09:57 GMT

APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!

So on the old version 17.3.4 it was need on the AP, but on the new version anymore.

How can I remote it ? It was expected to be removed by ISSU itself.

Re: WLC 9800 There is an install operation in progress. Please wait

Leo Laohoo — Fri, 27 May 2022 04:39:09 GMT

@rafafilho11 wrote:

install remove file bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin

I would like to recommend you contact TAC or developers so they can fix this.

Re: WLC 9800 There is an install operation in progress. Please wait

rafafilho11 — Sat, 04 Jun 2022 22:33:31 GMT

The TAC Team said:

"Brief summary. As part of troubleshooting this, it is advised to use the install activate issu command before completing the AP pre-download. This applies when you run the install activate issu command before completing AP pre-download. In such instances, you should run the ap image predownload command and then proceed with the activation. Likewise, this seems to be a message that you can dismiss. It might be missing from processes supposing to give a final status, but they have finished doing their task. You should configure a Syslog server on the WLC, and watch any output at regular intervals to check if anything comes up related to this."

So, in future I'll try to reboot de WLCs throught the switchover.

Re: WLC 9800 There is an install operation in progress. Please wait

Leo Laohoo — Sun, 05 Jun 2022 02:19:20 GMT

I am not sure what TAC is troubleshooting but it does not answer the question as to why the 17.3.4 SMU is still "installed" in a 17.3.5a firmware.

Re: WLC 9800 There is an install operation in progress. Please wait

rafafilho11 — Tue, 07 Jun 2022 11:57:04 GMT

Solved after reboot the WLC, probaly the command shared before by Leo could solved the problem as well.

After reboot we're not seeing anymore the old version related AP

APSP C bootflash:C9800-L-universalk9_wlc.17.03.04.CSCvz17868.SPA.apsp.bin!

After:

[ chassis 1/R0 ] Active Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
IMG C 17.03.05a.0.7

[ chassis 2/R0 ] Active Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
IMG C 17.03.05a.0.7

BEFORE: