topic Re: Mesh via WAP IW6300 in Wireless

Mesh via WAP IW6300

Alibek — Tue, 21 Jun 2022 07:14:07 GMT

Hi all

We deployed Mesh via WAP IW6300/WLC Catalyst 9800-80

But the download is low. Loading is normal. How to achieve the same rx and tx at both ends

DownloadUpload

Re: Mesh via WAP IW6300

Mark Elsen — Tue, 21 Jun 2022 08:20:32 GMT

- Have a look at : https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/214749-tac-recommended-ios-xe-builds-for-wirele.html

Not directly related topic but always useful :

- Review the 9800-80 configuration with the CLI command : show tech wireless , have the output analyzed by https://cway.cisco.com/tools/WirelessAnalyzer/ , please note do not use classical show tech-support (short version) , use the command denoted in green for Wireless Analyzer

Re: Mesh via WAP IW6300

Alibek — Tue, 21 Jun 2022 08:45:50 GMT

Hi marce1000,

Thanks for the feedback. I will open an official case for tech support

Re: Mesh via WAP IW6300

Mark Elsen — Tue, 21 Jun 2022 08:53:46 GMT

- That's ok , you can already execute my configuration review (too) , as explained in initial reply -> It will give you lots of insights.

Re: Mesh via WAP IW6300

Alibek — Wed, 12 Oct 2022 08:08:43 GMT

Hi all, Me again,

Question. Is this antenna AIR-ANT2547V-N-HZ compatible with the IW6300-H-AC-E-K9 for the deployment of MESH?

Re: Mesh via WAP IW6300

Alibek — Wed, 12 Oct 2022 09:54:47 GMT

and in which slot is it recommended (A, B, C, D) to connect the MESH method to the antenna?

Re: Mesh via WAP IW6300

Alibek — Thu, 01 Dec 2022 04:26:10 GMT