topic Re: Disable http at wlc in Wireless

Disable http at wlc

Leftz — Mon, 27 Jun 2022 16:20:04 GMT

Hi WLC 3504 with latest ver ios have http and https enabled. In 9800, when we want to disable http, we need some command to replace for the action. In 3504, can we directly disable http? Thank you

Re: Disable http at wlc

balaji.bandi — Mon, 27 Jun 2022 16:43:39 GMT

you mean managment in Cat 9800 , yes you can disable from GUI administrator > Manangment > http/https/netconfg

http Access (Disable)

Re: Disable http at wlc

Mark Elsen — Mon, 27 Jun 2022 16:48:36 GMT

- When using CLI on 9800 use the IOS-XE command : no ip http server

Re: Disable http at wlc

Leftz — Mon, 27 Jun 2022 17:00:29 GMT

Thanks for your reply. In 9800, it needs some commands like below.

parameter-map type webauth global

webauth-http-enable

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-3/config-guide/b_wl_17_3_cg/m_vewlc_sec_webauth_cg.html#d222597e3262a1635

Re: Disable http at wlc

balaji.bandi — Mon, 27 Jun 2022 17:08:28 GMT

that is for web authentication - what are you looking ?

Re: Disable http at wlc

Leftz — Mon, 27 Jun 2022 17:46:54 GMT

Without that command, wifi guest might have some issue. Not sure if 3504 has the similar issue

Re: Disable http at wlc

Flavio Miranda — Mon, 27 Jun 2022 18:15:56 GMT

Unlike 9800, 3504 is based in AIROS and you can disable HTTP on the "MANAGEMENT" tab, you just need to change HTTP Access from "Enable" to "Disable".

Reload is required.

Re: Disable http at wlc

Leftz — Mon, 27 Jun 2022 18:24:03 GMT

Thanks Flavio. I also think so.