topic Re: Configuring MSCHATV2 in 9800 in Wireless

Configuring MSCHATV2 in 9800

Leftz — Thu, 30 Jun 2022 14:56:06 GMT

Hi We have user who like to access wifi using MSCHATV2. Do we need to configure something for this MSCHATV2 in wlc 9800? Anyone can share the experience? or provide with some suggestions? Thank you

Re: Configuring MSCHATV2 in 9800

MHM Cisco World — Thu, 30 Jun 2022 15:05:31 GMT

I don't think MSCHATV2 is allow in 9800 but you can config EAP with MSCHATV2.

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215026-local-eap-authentication-on-catalyst-980.html

Re: Configuring MSCHATV2 in 9800

Rich R — Wed, 20 Jul 2022 23:58:19 GMT

Presume you mean MSCHAP v2 used for the EAP inner authentication method. ~~There's no specific configuration for that~~.

See also https://stackoverflow.com/questions/30344085/radius-with-ms-chapv2-explanation and https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-3/config-guide/b_wl_17_3_cg/local-extensible-auth-protocol.html
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-3/cmd-ref/b_wl_17_3_cr/configuration-commands-g-to-z.html#wp4018823814