topic Re: Changing regulatory domain 9120 in Wireless

Changing regulatory domain 9120

shreyasathavale2207 — Thu, 01 Sep 2022 04:20:12 GMT

Hey Folks,

I have thousands of C9120AXI-D with us in India and we want to use them by exporting them to other countries. Is there any method where we could change the regulatory domain of these AP's and then use it elsewhere?

Re: Changing regulatory domain 9120

Ambuj M — Thu, 01 Sep 2022 05:27:32 GMT

don't think so.

Re: Changing regulatory domain 9120

Kasun Bandara — Thu, 01 Sep 2022 05:34:25 GMT

No you cannot.

Re: Changing regulatory domain 9120

shreyasathavale2207 — Thu, 01 Sep 2022 06:16:16 GMT

Priming could be done until which AP model?

Re: Changing regulatory domain 9120

Ambuj M — Thu, 01 Sep 2022 10:45:07 GMT

Can you elaborate ?

Re: Changing regulatory domain 9120

shreyasathavale2207 — Thu, 01 Sep 2022 11:08:55 GMT

We did change the UX models earlier to whatever regulatory domain we wanted using Air Provision, right? Was this method only for the Aironet AP's and why do not we have it on the Catalyst AP's

Re: Changing regulatory domain 9120

Arshad Safrulla — Fri, 02 Sep 2022 08:02:04 GMT

Hi, UX models are different use case and even new AP's with ROW SKU can be provisioned to work with the country you are deploying. Technically the AP you have will work in any controller deployed any where in the world, but the WLC needs to have India added as a wireless country. (legal compliance must be reviewed by the user, below is just a technical guide)

Configuration -> Wireless -> Access Points -> Country

Then you can change the AP country one at a time using 9120AXi-D using it' advanced configuration tab.

Configuration ==> Wireless ==> Access Points ==> Access Point Name ==>Advanced

you can read the below article by @Rasika Nayanajith written for AireOS, but still most of the limitations and restrictions applies to 9800 when multiple countries configured in the WLC.

https://mrncciew.com/2013/04/07/configuring-country-codes-on-wlc/

Re: Changing regulatory domain 9120

shreyasathavale2207 — Fri, 02 Sep 2022 09:26:18 GMT

great,,thanks for the info but then @Arshad Safrulla coming back to my original question, I have thousands of C9120AXI-D with us in India and we want to use them by exporting them to other countries. Can we do that with just using them in other countries and enabling the country codes in respective location WLC's? I doubt this but would like to know your thoughts on this.

@Rasika Nayanajith Can you help?

Re: Changing regulatory domain 9120

Rich R — Fri, 02 Sep 2022 13:58:29 GMT

The answer is NO. Also in most countries it would be illegal to try to do so.

Re: Changing regulatory domain 9120

RavKam — Thu, 20 Feb 2025 14:56:55 GMT

Hello,

Please explain: adjustment to the proper country code is ... illegal ?

Even if hardware is exactly the same ...?

Re: Changing regulatory domain 9120

Scott Fella — Thu, 20 Feb 2025 15:06:29 GMT

It's all about regulations and what the governing body has approved. You can't just bring in items to any country. Countries have set their own regulations on what channels you can and can't use, the EIRP and also requirements for DFS channels. You can possibly interfere with radar or even with the military there and you will have them knocking on your door.

You can do whatever you want, you take the risk.