topic wireless Qos config at switch in Wireless

wireless Qos config at switch

Leftz — Thu, 01 Sep 2022 15:37:15 GMT

Hi we have wireless 9800 system. APs are connected to C9300 switch. The client would need some meeting via MS Team etc at their PC or laptop. In the configuration of switch port connected AP, we have several choices as below. Which one is better for the purpose? Thanks

SW(config-if)#auto qos ?
classify Configure classification for untrusted devices
trust Trust the DSCP/CoS marking
video Configure AutoQoS for video devices
voip Configure AutoQoS for VoIP

Re: wireless Qos config at switch

balaji.bandi — Thu, 01 Sep 2022 16:46:33 GMT

check how the QOS can be configured :

https://mrncciew.com/2013/07/23/qos-for-h-reap/

Re: wireless Qos config at switch

Leftz — Thu, 01 Sep 2022 21:08:15 GMT

Thank you balaji for your reply. its a good article. I know the author published a lot ones

Can I ask one more question in this thread? it depends on what kind of mark would be added in WLC. so it depends on the configuration at wlc. can you comment on the configuration at wlc?

Re: wireless Qos config at switch

balaji.bandi — Fri, 02 Sep 2022 12:25:52 GMT

If you looking to implment on Cat 9800, look same Blogger have good information :

https://mrncciew.com/2021/10/06/9800-auto-qos/