topic Re: client which is under AP2802E cannot get a ip address in Wireless

client which is under AP2802E cannot get a ip address

Rps-Cheers — Mon, 05 Jul 2021 15:40:35 GMT

HI everyone， I have a problem is that client which is under AP2802E cannot get a ip address ，after we reload the ap,the issue can be resloved temporarily . There are some abnormal logg when the issue occur. "ay 25 01:44:39 kernel: [*05/25/2018 01:44:39.9093] !!!!! {watchdogd} WARNING: System memory is running low (Free memory:100)!! May 25 01:44:39 kernel: [*05/25/2018 01:44:39.9093] May 25 01:55:29 apsw_watchdog: WARNING: System memory is running low (Free memory:100)!! May 25 01:55:29 kernel: [*05/25/2018 01:55:29.6910] May 25 01:55:29 kernel: [*05/25/2018 01:55:29.6910] !!!!! {watchdogd} WARNING: System memory is running low (Free memory:100)!! May 25 01:55:29 kernel: [*05/25/2018 01:55:29.6910] May 25 02:06:20 apsw_watchdog: WARNING: System memory is running low (Free memory:99)!! May 25 02:06:20 kernel: [*05/25/2018 02:06:20.0242] May 25 02:06:20 kernel: [*05/25/2018 02:06:20.0242] !!!!! {watchdogd} WARNING: System memory is running low (Free memory:99)!!" attached is debug info and other "show" info of WLC and AP,please help me to resloved this issue,"debug（client normal）" file is collected when client can get a ip address. thanks~

Re: client which is under AP2802E cannot get a ip address

Rasika Nayanajith — Mon, 28 May 2018 03:59:23 GMT

cisco AIR-AP2802E-H-K9 ARMv7 Processor rev 1 (v7l) with 1030616/704516K bytes of memory.
Processor board ID FGL2128A7B9
AP Running Image     : 8.3.122.0
Primary Boot Image   : 8.3.122.0

I would upgrade to 8.3.141.0 & then observe it. Below msg symtoms of memory leak/software bug

25 01:44:39 kernel: [*05/25/2018 01:44:39.9093] !!!!! {watchdogd} WARNING: System memory is running low (Free memory:100)!! May 25 01:44:39 kernel: [*05/25/2018 01:44:39.9093] May 25 01:55:29 apsw_watchdog:

HTH

Rasika

*** Pls rate all useful responses ***

Re: client which is under AP2802E cannot get a ip address

Rps-Cheers — Mon, 28 May 2018 04:03:03 GMT

Hi Rasika；
thansk for your help，and is there any bug about it？

Re: client which is under AP2802E cannot get a ip address

Rps-Cheers — Mon, 28 May 2018 04:05:39 GMT

the memory leak whether will lead to client cannot get a ip add

Re: client which is under AP2802E cannot get a ip address

Rasika Nayanajith — Mon, 28 May 2018 04:15:20 GMT

Yes, memory leak could resulting weird stuff including client not getting IP as well.

HTH

Rasika

Re: client which is under AP2802E cannot get a ip address

pdeberar — Thu, 08 Sep 2022 17:47:21 GMT

I am experiencing the same behaviours Cisco 3802i AP and v8.5.161.0

After some times, some clients not getting IP address, after a reboot of AP, they get online and eventually same

What command to debug AP?