topic Re: 8510 IRCM Image in Wireless

8510 IRCM Image

dm2020 — Mon, 12 Sep 2022 08:51:37 GMT

Hi All,

I am planning to configure security mobility between a 8510 WLC and 9800 WLC. To support this I need to upgrade the 8510 from 8.5.171.0 to an IRCM supported release. I have checked Cisco downloads and there are a few IRCM images to choose from however I am unsure if there is a specific image I should use in my deployment or just go with the latest and TAC recommended version (currently 8.5.182.104)?

Any advice appreciated

Re: 8510 IRCM Image

Mark Elsen — Mon, 12 Sep 2022 10:28:31 GMT

- Ref : https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html , check Table 1 and column mentioning Cisco AireOS-IRCM Interoperability. You could probably use a TAC recommended AireOS release provide these compatibilities are OK

Re: 8510 IRCM Image

Rich R — Mon, 12 Sep 2022 12:33:04 GMT

https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html#anc11
Current recommended is 8.5.182.104 so that's what you should use.

Re: 8510 IRCM Image

Rasika Nayanajith — Mon, 12 Sep 2022 21:17:38 GMT

Yes I would go with 8.5.182.104 & follow below document when configuring. I assume this is for Guest anchoring use case

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/b_c9800_wireless_controller-aireos_ircm_dg.html

HTH
Rasika
*** Pls rate all useful responses ***