topic Remove EWC Software completly in Wireless

Remove EWC Software completly

murmucka — Thu, 06 Oct 2022 11:34:25 GMT

Hi,

i have a C9120axe Access Point, with factory installed EWC software as default. I would use it as Normal AP with an 9800 WLC. Therefor: how can i remowe completly the EWC Software from the device?

(not only to tun in capwap mode)

Thanks

Re: Remove EWC Software completly

Rich R — Thu, 06 Oct 2022 16:08:17 GMT

1. https://www.cisco.com/c/en/us/support/docs/wireless/embedded-wireless-controller-on-catalyst-access-points/215303-embedded-wireless-controller-conversion.html#anc18
2. Load the standard AP software onto the AP: https://software.cisco.com/download/home/286322979/type/286288051/release/15.3.3-JPK5 That's the 17.6.4 version - select your preferred release as per https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#ctr-ap_support