Access Point C9115AXI-E Failed To Boot up

Abdelmounim Metrane — Fri, 28 Oct 2022 16:09:36 GMT

I boot up a new cisco Access Point C9115AXI , but i'm getting some errors in logs like this :

| | | |/ __| / __|/ _ \
| |___ | |\__ \| (__| (_) |
\____||_||___/ \___|\___/
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|

U-Boot 2017.09 (May 21 2020 - 19:22:05 -0700) Broadcom BCM49408

Board: SS-i
I2C: ready
DRAM: 2 GiB
enable MMU ... OK
NAND: Status wait timeout: nandsts=0x0 mask=0x40000000, count=0
NAND ECC BCH-8, page size 4096 bytes, spare size used 216 bytes
1024 MiB
MMC:
SF: Detected mx25l6405d with page size 256 Bytes, erase size 4 KiB, total 8 MiB
In: serial
Out: serial
Err: serial
Platform: 4908
SF: Detected mx25l6405d with page size 256 Bytes, erase size 4 KiB, total 8 MiB
saved CRC ffffffff doesn't = calc CRC 997e20e8

*** Board is not initialized properly ***

Uncorrectable ECC Error: intr 0x50, addr=0x0, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x1000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x2000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x3000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x4000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x5000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x6000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x7000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x8000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0x9000, blk=0,
Uncorrectable ECC Error: intr 0x50, addr=0xa000, blk=0,

see the full logs in the attached file

Re: Access Point C9115AXI-E Failed To Boot up

Mark Elsen — Fri, 28 Oct 2022 17:14:55 GMT

- The access point is toast (fatal hardware condition) , have it replaced (RMA).

Re: Access Point C9115AXI-E Failed To Boot up

Leo Laohoo — Sat, 29 Oct 2022 00:11:54 GMT

Get the AP RMAed.

topic Re: Access Point C9115AXI-E Failed To Boot up in Wireless

Access Point C9115AXI-E Failed To Boot up

Re: Access Point C9115AXI-E Failed To Boot up

Re: Access Point C9115AXI-E Failed To Boot up