topic Re: New APs manufactured after Sept 2022 can't join older codes in Wireless

New APs manufactured after Sept 2022 can't join older codes

patoberli — Thu, 25 Aug 2022 08:14:32 GMT

Hi All

I just discovered this notice: C9105/C9120/C9130 Access Points Manufactured Starting in September 2022 May Require Code Upgrades
https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9120axi-access-point/218081-c9105-c9120-c9130-access-points-manufact.html

And the FN: https://www.cisco.com/c/en/us/support/docs/field-notices/724/fn72424.html (link dead at this moment)

Summary:
The following AP models (Product identifiers, or PIDs), with the following Version identifiers (VIDs), will be unable to join controllers that are running software released prior to August 2022:

C9105AXI, C9105AXW - VID 04 or later
C9120AXI, C9120AXE - VID 07 or later
C9130AXI, C9130AXE - VID 03 or later

The affected APs require the following controller software versions:

8.10MR8 (8.10.18x.0) or above
17.3.6 or above
17.6.4 or above
17.9.2 or above

Regards
Patrick

Re: New APs manufactured after Sept 2022 can't join older codes

Mark Elsen — Thu, 25 Aug 2022 12:12:20 GMT

- I heard from RIchard Atkin that the link to the field notice will probably be available starting from tomorrow.

Re: New APs manufactured after Sept 2022 can't join older codes

rfd1 — Thu, 03 Nov 2022 08:31:39 GMT

Does anyone know when 17.9.2 will be available to download?

Rgds

Ross

Re: New APs manufactured after Sept 2022 can't join older codes

Mark Elsen — Fri, 04 Nov 2022 11:38:44 GMT

>....Does anyone know when 17.9.2 will be available to download?

- Probably before end of next week.