https://community.cisco.com/t5/wireless/cisco-catalyst-9130axi/m-p/4727300#M248671 <P>I recently deployed some Catalyst 9130AXI access points on my Catalyst 9800 wireless controller. Under the radio statistics of the C9130 access points it is showing that spectrum analysis is disabled. What is that indicating? Does it mean that the access points are not configured in mode spectrum analysis or does it mean that spectrum analysis is disabled on the RF ASIC chipset?</P> Thu, 24 Nov 2022 08:56:03 GMT Maurice Ball 2022-11-24T08:56:03Z https://community.cisco.com/t5/wireless/cisco-catalyst-9130axi/m-p/4727300#M248671 <P>I recently deployed some Catalyst 9130AXI access points on my Catalyst 9800 wireless controller. Under the radio statistics of the C9130 access points it is showing that spectrum analysis is disabled. What is that indicating? Does it mean that the access points are not configured in mode spectrum analysis or does it mean that spectrum analysis is disabled on the RF ASIC chipset?</P> Thu, 24 Nov 2022 08:56:03 GMT https://community.cisco.com/t5/wireless/cisco-catalyst-9130axi/m-p/4727300#M248671 Maurice Ball 2022-11-24T08:56:03Z https://community.cisco.com/t5/wireless/cisco-catalyst-9130axi/m-p/4727323#M248673 <P>by default its disable, if you looking to do spectrum analysis you need to enable per AP basis on demand ( there is good live presentation if you have access cisco live on demand - BRKEWN-2480)</P> <P><A href="https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-2/config-guide/b_wl_17_2_cg/b_wl_17_2_cg_chapter_010011001.html" target="_blank">https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-2/config-guide/b_wl_17_2_cg/b_wl_17_2_cg_chapter_010011001.html</A></P> Thu, 24 Nov 2022 09:35:46 GMT https://community.cisco.com/t5/wireless/cisco-catalyst-9130axi/m-p/4727323#M248673 balaji.bandi 2022-11-24T09:35:46Z