topic Re: LED flash function to identify from AP in 9800 not available? in Wireless

LED flash function to identify from AP in 9800 not available?

Ufuk 57 — Mon, 05 Jul 2021 17:27:30 GMT

hello together, I'm currently make a PoC with the 9800 controllers at the customer.

with a few hurdles, everything is going well so far.

I’ve seen, the feature LED flash blinking is not available on the 9800 or I dont find it?! an idea when will get available?

It is useful for quick troubleshootings and imageing/labeling of access Points, See attachment 😉

Re: LED flash function to identify from AP in 9800 not available?

patoberli — Mon, 27 May 2019 08:44:56 GMT

What release are you running on the 9800? The 8.5 special TAC release or 8.9.x?
Maybe the other version contains it.
Reference: https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html

Re: LED flash function to identify from AP in 9800 not available?

Ufuk 57 — Mon, 27 May 2019 12:07:34 GMT

The Release Gibraltar-16.10.1e ED is currently running.

I don't think that the version that you mean (8.x), works on the new cisco 9800 controller?

Re: LED flash function to identify from AP in 9800 not available?

patoberli — Mon, 27 May 2019 14:13:20 GMT

Sorry I forgot that it's not running WLC code but IOS XE code.

Can you try on the CLI the following:

config ap led-state flash 500 name-of-ap

This should blink the LED for 500 seconds for the selected AP.

If it doesn't work, open a TAC 🙂 This is how to do it on the older WLCs. I don't have an 9800 for testing.

Manual: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg.pdf

Re: LED flash function to identify from AP in 9800 not available?

Ufuk 57 — Mon, 27 May 2019 14:18:26 GMT

this command is not available, all the most of commands in AirOS is in IOSXE not available..

so I think, it's not issued in this realease..
-> feature request 🙂

Re: LED flash function to identify from AP in 9800 not available?

Jiri Brejcha — Fri, 18 Dec 2020 13:30:51 GMT

It is now available on Catalyst 9800 controllers since IOS-XE release 17.3.1:

ap name Jiri-C9130 led flash start/stop

Re: LED flash function to identify from AP in 9800 not available?

NWZ — Wed, 30 Nov 2022 20:00:54 GMT

Hello,

Is it possible to do this from the 9800 webpage ? (rather than from its CLI). Thanks.

Re: LED flash function to identify from AP in 9800 not available?

patoberli — Thu, 04 Aug 2022 18:28:20 GMT

Not that I know of so far.

Re: LED flash function to identify from AP in 9800 not available?

hestonk1 — Wed, 30 Nov 2022 15:46:01 GMT

I can confirm you can do this in the 17.9.x gui! But it definitely doesn't exist in 17.3.x