topic wcs in Wireless https://community.cisco.com/t5/wireless/wcs/m-p/562707#M24990 <P>in the wcs is the heatmap based upon rf-prediction or measured rf values?</P> Sun, 04 Jul 2021 19:37:42 GMT diro 2021-07-04T19:37:42Z wcs https://community.cisco.com/t5/wireless/wcs/m-p/562707#M24990 <P>in the wcs is the heatmap based upon rf-prediction or measured rf values?</P> Sun, 04 Jul 2021 19:37:42 GMT https://community.cisco.com/t5/wireless/wcs/m-p/562707#M24990 diro 2021-07-04T19:37:42Z Re: wcs https://community.cisco.com/t5/wireless/wcs/m-p/562708#M24991 <HTML><HEAD></HEAD><BODY><P>If you are using WCS Location, WCS compares the RSSI signal strength from two or more access points to find the most probable location of the client and places a small laptop icon at its most likely location. If you are using WCS Base, WCS relies on the RSSI signal strength from the client and places a small laptop icon next to the access point that receives the strongest RSSI signal from the client.Refer the following URL for more info </P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a008059ca02.html" target="_blank">http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a008059ca02.html</A></P></BODY></HTML> Thu, 20 Jul 2006 16:07:32 GMT https://community.cisco.com/t5/wireless/wcs/m-p/562708#M24991 b.hsu 2006-07-20T16:07:32Z