topic Re: AP1832I-E-K9C extract configuration in Wireless

AP1832I-E-K9C extract configuration

pdenableetoavit19698 — Fri, 20 Jan 2023 09:49:34 GMT

Hi there,

what would be the best way to extract all the configuration of this switch in order to do firmware update/reset and restart all from scratch but having a bit of a road map and reference to some of the settings?

is there any step by step guide available?

Thank you!

Re: AP1832I-E-K9C extract configuration

Mark Elsen — Fri, 20 Jan 2023 13:45:49 GMT

- Try : # show run-config ,

Re: AP1832I-E-K9C extract configuration

Sandeep Choudhary — Fri, 20 Jan 2023 12:46:02 GMT

I am guessing that its a ME WLC. if its is then check this posts to take the backup of the config:

https://itadminguide.com/backup-cisco-mobility-express-configuration/

Regards

Dont forget to rate helpful posts

Re: AP1832I-E-K9C extract configuration

Rich R — Sun, 29 Jan 2023 14:04:03 GMT

And to add: I find "show run-config commands" and "show run-config startup" more useful than "show run-config".
The formatting of the output is often dreadful but if you search and replace all double spaces with single spaces that usually leaves you with a readable config.

Re: AP1832I-E-K9C extract configuration

pdenableetoavit19698 — Mon, 27 Feb 2023 21:41:46 GMT

Having access to WLC GUI, is there any difference on the configuration available for download?

To download via CLI do you need to connect to the controller physically and run the cisco cable to its console?

thanks

Re: AP1832I-E-K9C extract configuration

Scott Fella — Mon, 27 Feb 2023 21:47:36 GMT

You best bet is to get familiar with the process. Since your setup is most likely mobility express, you can search", Cisco mobility express backup configuration". You will find links that can help you. I have provided on that is also step by step on saving a backup of your configuration, that way you can perform a restore.

https://networksandrants.com/2019/06/05/backup-and-restore-config-of-mobility-express/