topic Re: Cisco WLC 9800 Interim Accounting Setting in Wireless

Cisco WLC 9800 Interim Accounting Setting

afiqazmii119 — Tue, 07 Feb 2023 03:39:01 GMT

I have trouble to search for Interim Accounting as i need to enable the setting, where can i find or what command should i put to check the setting is enabled or not

Re: Cisco WLC 9800 Interim Accounting Setting

Mark Elsen — Tue, 07 Feb 2023 07:29:46 GMT

- Check this document : https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-9/config-guide/b_wl_17_9_cg/m_interim-accounting.html

Re: Cisco WLC 9800 Interim Accounting Setting

balaji.bandi — Tue, 07 Feb 2023 07:32:47 GMT

check here :

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-9/config-guide/b_wl_17_9_cg/m_interim-accounting.html

Re: Cisco WLC 9800 Interim Accounting Setting

afiqazmii119 — Tue, 07 Feb 2023 07:34:36 GMT

Hi M.

Tahnk you for the reply. I have tried to enter the following commands at our CLI, but the expected output does not come out. You can refer on this picture;

Re: Cisco WLC 9800 Interim Accounting Setting

Mark Elsen — Tue, 07 Feb 2023 07:39:04 GMT

>...but the expected output does not come out.
- What is software version is the 9800 running ?

Re: Cisco WLC 9800 Interim Accounting Setting

afiqazmii119 — Tue, 07 Feb 2023 07:45:05 GMT

Hi M.

As per CLI, it is version 17.03.05a

Re: Cisco WLC 9800 Interim Accounting Setting

afiqazmii119 — Tue, 07 Feb 2023 07:46:45 GMT

Hi BB,

I have tried above solution and the controller does not prompt expected output;

Re: Cisco WLC 9800 Interim Accounting Setting

Mark Elsen — Tue, 07 Feb 2023 07:58:54 GMT

>...As per CLI, it is version 17.03.05a
- Search engines revealed document describing these feature from 17.9.x , it might be that the feature is not available earlier and or starting from that release , I will research that and come back on it if I find anything conclusive but it looks like it , it is also advised to not using the default profile when using special features

Re: Cisco WLC 9800 Interim Accounting Setting

afiqazmii119 — Tue, 07 Feb 2023 08:07:00 GMT

Hi M,

Thank you for the replies, but can i ask what do you mean by "advised to not using the default profile when using special features".

Re: Cisco WLC 9800 Interim Accounting Setting

Mark Elsen — Tue, 07 Feb 2023 09:08:56 GMT

- Create a new profile , with settings according to your needs.

Re: Cisco WLC 9800 Interim Accounting Setting

Mark Elsen — Tue, 07 Feb 2023 09:22:10 GMT

- Also after finishing configuring the controller , this is very useful and advised : Review the 9800 configuration with the CLI command : show tech wireless , have the output analyzed by https://cway.cisco.com/tools/WirelessAnalyzer/ , please note do not use classical show tech-support (short version) , use the command denoted in green for Wireless Analyzer.