topic Re: Is there a command that can be seen like dir flash on cisco ap 911 in Wireless

Is there a command that can be seen like dir flash on cisco ap 9115?

CCC3 — Tue, 28 Feb 2023 07:04:52 GMT

I want to check the capacity of os downloaded from wlc from ap.

Is there a command that can be seen like dir flash on cisco ap 9115?

wlc -> 8540

os -> 8.10.171.0

Re: Is there a command that can be seen like dir flash on cisco ap 911

Mark Elsen — Tue, 28 Feb 2023 07:14:39 GMT

- Enable telnet and or ssh from the controller to the access point, then you may be able to execute dir flash: on the access point ,

Re: Is there a command that can be seen like dir flash on cisco ap 911

CCC3 — Tue, 28 Feb 2023 07:18:46 GMT

Thanks for the answer, but there is no command called dir itself.

Re: Is there a command that can be seen like dir flash on cisco ap 911

Mark Elsen — Tue, 28 Feb 2023 07:46:50 GMT

- Check command options for show ? and or post available options here :

Re: Is there a command that can be seen like dir flash on cisco ap 911

Rich R — Wed, 01 Mar 2023 16:51:30 GMT

Short answer: no you can not.
AP COS stores the boot image completely differently to IOS in a separate partition. Each image (primary and backup) gets a separate partition.
If you just want to see the size of the image you can look at the downloadable version - eg:
https://software.cisco.com/download/home/286322352/type/286288051/release/15.3.3-JPN1

Re: Is there a command that can be seen like dir flash on cisco ap 911

Scott Fella — Wed, 01 Mar 2023 17:29:18 GMT

Take a look at this link, don't know if this is what you are trying to obtain from the ap or not.

AP Filesystem

COS APs do not allow to list all the content of the file system as on unix platforms.

The command "show filesystems"gives a detail of the space usage and distribution on the current partition:

2802#show filesystems 
Filesystem                Size      Used Available Use% Mounted on
/dev/ubivol/storage      57.5M    364.0K     54.1M   1% /storage
2802#

https://www.cisco.com/c/en/us/support/docs/wireless/aironet-2800-series-access-points/214560-troubleshoot-wave-2-aps.html#anc22