topic Re: WLC 5520 || CLI disconnect through VPN in Wireless

WLC 5520 || CLI disconnect through VPN

lAhmed Saadl — Mon, 27 Mar 2023 06:39:43 GMT

Dears,

Could you please advice and guide regarding the following issue.

WLC CLI session disconnect after a few seconds when accessing using VPN?” GUI works fine.

Re: WLC 5520 || CLI disconnect through VPN

Mark Elsen — Mon, 27 Mar 2023 10:38:53 GMT

- Check controller logs when that happens, also have a look at the (management) interface counters on the controller (trough which the CLI access is arriving on) with :
show stats port detailed 1 (port index may vary)
Also compare and or try with another ssh-client (sodtware) and check if the behavior remains the same or not.

Re: WLC 5520 || CLI disconnect through VPN

Rich R — Mon, 27 Mar 2023 23:56:33 GMT

What version of software are you using?

Re: WLC 5520 || CLI disconnect through VPN

lAhmed Saadl — Tue, 28 Mar 2023 04:20:39 GMT

Hello Marce,

I have checked the logs, nothing found except I was always need to open user session to terminate the previous stuckking session as I only allow 5 of active connections.

Will check with some other clients and update you.

Re: WLC 5520 || CLI disconnect through VPN

lAhmed Saadl — Tue, 28 Mar 2023 04:21:00 GMT

It's 8.10.171.0