topic Re: HA SS0 'Invalid Input' in Wireless

HA SS0 'Invalid Input'

j22dodge — Fri, 07 Apr 2023 20:23:16 GMT

Hello,

I am trying to configure HA-SSO (RMI+RP) between two 9800-CL controllers. Both running 17.6.4. Chassis 1 seems to work just fine. But chassis two gives me this message every time.

" redun-management interface chassis 1 address 10.89.240.114 chassis 2 address 10 ^.89.240.115
Invalid input detected at '^' marker. "

Any ideas about what the issue could be?

Thanks in advance.

Re: HA SS0 'Invalid Input'

Flavio Miranda — Fri, 07 Apr 2023 20:39:22 GMT

Did you add some space or characte on the IP address?

This a real log copy or did you type it?

" redun-management interface chassis 1 address 10.89.240.114 chassis 2 address 10 ^.89.240.115

It seems theres something wrong

Re: HA SS0 'Invalid Input'

j22dodge — Fri, 07 Apr 2023 20:42:05 GMT

Hello,

That is copied from the log error.

Re: HA SS0 'Invalid Input'

Flavio Miranda — Fri, 07 Apr 2023 20:49:01 GMT

Did you try to delete the IP and enter again? Maybe do from CLI instead

Re: HA SS0 'Invalid Input'

j22dodge — Fri, 07 Apr 2023 20:53:23 GMT

I have tried Deleting the IP and re-adding it. Also does not seam to work. I have also tried configuring it through the CLI, it takes, but they do not pair.

Re: HA SS0 'Invalid Input'

Scott Fella — Fri, 07 Apr 2023 22:15:20 GMT

Factory reset the secondary unit and start over. That should fix the issue if the issue is with the secondary.