topic Re: Embedded wireless controller not access through WebGui in Wireless

Embedded wireless controller not access through WebGui

sachinsharma0021 — Wed, 12 Apr 2023 06:12:43 GMT

Hi All,

I am facing EWLC WebGui access issue in my environment. We are using DNAC (2.3.3.6), Border/WLC role enable switch (9300 - 17.3.3) & EWLC concept for local sites. But somehow unable to access the EWLC through WebGUI & getting SSL error. Could you please help me out how to resolve that issue.

Please find the below some reference command output

ABC1#sh run | i http
http
enrollment url http://XX.XX.XX.XX:80/ejbca/publicweb/apply/scep/sdnscep
ip http server
ip http authentication local
ip http secure-server
ip http max-connections 16
ip http active-session-modules none
ip http client source-interface Loopback0
destination transport-method http
http-tlv-caching
http-tlv-caching
http-tlv-caching

ABC1#sh run | i crypto
crypto pki trustpoint TP-self-signed-XXXXXX
crypto pki trustpoint SLA-TrustPoint
crypto pki trustpoint sdn-network-infra-iwan
crypto pki trustpoint DNAC-CA
crypto pki certificate chain TP-self-signed-XXXXXX
crypto pki certificate chain SLA-TrustPoint
crypto pki certificate chain sdn-network-infra-iwan
crypto pki certificate chain DNAC-CA
crypto pki certificate pool

Re: Embedded wireless controller not access through WebGui

Mark Elsen — Wed, 12 Apr 2023 06:40:18 GMT

- What kind of SSL error are you getting (and or post screenshot) ?

Re: Embedded wireless controller not access through WebGui

sachinsharma0021 — Wed, 12 Apr 2023 06:45:12 GMT

Re: Embedded wireless controller not access through WebGui

Mark Elsen — Wed, 12 Apr 2023 07:00:25 GMT

- Have a checkup of the controller configuration with the CLI command : show tech wireless , feed that output into :
https://cway.cisco.com/wireless-config-analyzer/
Also check the logs on the controller when the WebGui access is attempted ,

Re: Embedded wireless controller not access through WebGui

sachinsharma0021 — Wed, 12 Apr 2023 07:44:49 GMT

I checked in WLC logs, no such messages "WebGui access is attempted" found.

Re: Embedded wireless controller not access through WebGui

Mark Elsen — Wed, 12 Apr 2023 08:36:38 GMT

- Anything else in the logs when the WebGui access is attempted (?) , also reminder use this procedure too
Have a checkup of the controller configuration with the CLI command : show tech wireless , feed that output into :
https://cway.cisco.com/wireless-config-analyzer/

Re: Embedded wireless controller not access through WebGui

sachinsharma0021 — Wed, 12 Apr 2023 08:38:48 GMT

Nothing is there related to WebGui.

Re: Embedded wireless controller not access through WebGui

Mark Elsen — Wed, 12 Apr 2023 08:59:51 GMT

- Have a checkup of the controller configuration with the CLI command : show tech wireless , feed that output into :
https://cway.cisco.com/wireless-config-analyzer/

Re: Embedded wireless controller not access through WebGui

sachinsharma0021 — Wed, 12 Apr 2023 09:05:31 GMT

Yes, I pasted the output in given URL of show tech wireless. But nothing found in WLC logs related to WebGui access.

WLC Logs Summary

WLC Logs: USCLDC001

FED_L3_ERRMSG-3-RSRC_ERR Times SeenFirst SeenLast SeenTextDMI-5-AUTH_PASSED Times SeenFirst SeenLast SeenTextDOT1X-5-FAIL Times SeenFirst SeenLast SeenTextDHCP_SNOOPING-5-DHCP_SNOOPING_FAKE_INTERFACE Times SeenFirst SeenLast SeenTextSEC_LOGIN-5-LOGIN_SUCCESS Times SeenFirst SeenLast SeenTextHA_EM-6-LOG Times SeenFirst SeenLast SeenTextSYS-6-LOGOUT Times SeenFirst SeenLast SeenTextSYS-6-TTY_EXPIRE_TIMER Times SeenFirst SeenLast SeenText

Apr 12 2023 06:31:27.252 UTC:

Apr 12 2023 06:39:18.673 UTC:

Switch 1 R0/0: fed: Failed to allocate hardware resource for fib entry due to hardware resource exhaustion - rc:2054

Apr 12 2023 01:43:29.445 UTC:

Switch 2 R0/0: dmiauthd: User 'dnac' authenticated successfully from XX.XX.XX.XX):36241 and was authorized for netconf over ssh. External groups: PRIV15

Apr 12 2023 01:53:20.717 UTC:

Apr 12 2023 07:03:08.144 UTC:

Switch 2 R0/0: sessmgrd: Authentication failed for client (ec01.d568.1aec) with reason (No Response from Client) on Interface Gi2/0/25 AuditSessionID 21C3400A000000A671874CF6

Apr 12 2023 04:35:21.011 UTC:

Apr 12 2023 06:11:01.146 UTC:

DHCP_SNOOPING drop message with mismatched source interface, the binding is not updated, message type: DHCPRELEASE, MAC sa: 48a2.e659.f34b

Apr 12 2023 05:29:47.094 UTC:

Apr 12 2023 07:04:36.633 UTC:

323

Apr 12 01:43:14.503:

Apr 12 07:05:45.056:

catchall: show platform software flow switch 7 FP active ios monitor name dnacmonitor cache filter 0 0 0 0 0 timestamp 51127F2C0

Apr 12 2023 01:51:03.839 UTC:

Apr 12 2023 06:03:38.064 UTC:

User dnac has exited tty session 1(10.76.17.16)

Apr 12 2023 06:03:38.063 UTC:

(exec timer expired, tty 1 (XX.XX.XX.XX)), user dnac

Re: Embedded wireless controller not access through WebGui

Mark Elsen — Wed, 12 Apr 2023 10:29:29 GMT

- Try the procedure mentioned by Scott Fella from this thread :
https://community.cisco.com/t5/wireless/cisco-9800-wreless-controller-not-getting-the-http-or-https/td-p/3988305

Re: Embedded wireless controller not access through WebGui

Rich R — Thu, 13 Apr 2023 13:08:53 GMT

Have you tried a different browser?

What browser and version are you using?

Is WLC and PC time both set correctly (NTP)?