topic Re: RF Profile assigned in RF Tag is not applied to the APs in Wireless

RF Profile assigned in RF Tag is not applied to the APs

chathu74 — Wed, 19 Apr 2023 07:26:51 GMT

Hi, I'm trying to apply a RF profile to a group of APs (APs are assigned the same RF Tag) but failed. These are the steps I followed.

1) Create a RF profile (Under RRM -> DCA I have selected only specific channels)

2) Assigned the created RF profile to the RF Tag (I Have created a RF profile only for the 5GHz band)

3 Restarted APs in that RF Tag is assigned. But still, those APs are transmitting other channels although the RF Tag and RF profile is assigned to those.

Can anyone please tell me why this RF profile is not applied to the APs?

Thank you

Re: RF Profile assigned in RF Tag is not applied to the APs

Leo Laohoo — Wed, 19 Apr 2023 07:33:13 GMT

What is the WLC firmware version?

Re: RF Profile assigned in RF Tag is not applied to the APs

chathu74 — Wed, 19 Apr 2023 08:25:23 GMT

Its Cisco Catalyst 9800-L Wireless Controller with the firmware version 17.6.5

Re: RF Profile assigned in RF Tag is not applied to the APs

Mark Elsen — Wed, 19 Apr 2023 09:06:44 GMT

- Have a checkup-review of your 9800-L Wireless Controller current configuration with the CLI command : show tech wireless , have the output analyzed with : https://cway.cisco.com/wireless-config-analyzer
Checkout all advisories , correct issues if needed then try your (initial) actions again ,

Re: RF Profile assigned in RF Tag is not applied to the APs

Rich R — Wed, 19 Apr 2023 16:06:49 GMT

You mentioned that you created the RF tag and assigned the RF profile but did you apply that RF tag to the AP (you didn't mention it)?

"show ap tag summ" will show you what tags are assigned to the APs (and the source) - my guess is you forgot to assign the tag to the AP.

For example:
ap filter name rf-f-bldh
ap name-regex ^bldh.*
tag policy bldh
tag rf rf-f-bldh
tag site bldh

Re: RF Profile assigned in RF Tag is not applied to the APs

ReFeeL — Thu, 12 Dec 2024 03:50:03 GMT

Have you solved the problem?